We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow low-profile SATA cable, straight-to-right connectors, 27 inch flexible rubber sleeve

SATACables

SATACables LP30SR685 27 Inch Low Profile Right to Straight SATA Cable

SKU CH-K180-QN82H

A 27 inch low-profile SATA cable with a straight-to-right-angle design, supporting 6.0 Gbps data transfer for hard drives and optical drives

  • 27 inch length simplifies routing in tight cases
  • Low-profile right-angle connector clears cramped motherboard headers
  • 0 Gbps SATA III bandwidth supports modern SSDs and HDDs
  • Shielded cable resists EMI and RFI interference
  • Flexible rubber sleeve bends without kinking for clean airflow

Cable Length and Connectors

This 27 inch SATA cable connects a motherboard host port to a hard drive or optical device. The low-profile right-angle connector on one end and a straight connector on the other suit tight spaces in desktops, notebooks or servers. It supports SATA 3.0 speeds up to 6.0 Gbps while remaining backwards compatible with 1.5 Gbps and 3.0 Gbps devices.

Port Clearance and Latch Check

Before ordering, verify that the target device has enough side clearance for the right-angle plug to seat fully. Confirm the motherboard SATA port uses a standard latch so the cable locks securely and resists vibration. The yellow low-profile housing reduces height but still requires the same latch engagement as a regular connector.

Build Integration and Airflow

The flexible rubber-sleeved cable bends and routes cleanly around other components, improving internal airflow compared with flat ribbon alternatives. Silver mesh shielding protects the signal from EMI and RFI inside the case. The point-to-point dedicated bus connection ensures consistent throughput for HDDs, SSDs, Blu-ray or DVD drives without needing additional adapters.

Highlights

  • 27 inch length simplifies routing in tight cases
  • Low-profile right-angle connector clears cramped motherboard headers
  • 0 Gbps SATA III bandwidth supports modern SSDs and HDDs
  • Shielded cable resists EMI and RFI interference
  • Flexible rubber sleeve bends without kinking for clean airflow

Specifications

ModelLP30SR685

Questions about this item

What connectors come on the LP30SR685 and do I need any extra adapters?

The cable has a straight SATA connector on one end and a right-angle SATA connector on the other; no additional adapters are required for standard SATA devices.

Which SATA revision should I choose for a 6 Gbps drive?

This cable is built to the SATA 3.0 (6.0 Gbps) specification and is backward compatible with 1.5 Gbps and 3.0 Gbps devices.

What does the 6.0 Gbps rating mean once the cable is installed?

It supports up to 600 MB/s transfer speed between the motherboard and a SATA III drive, while the low-profile right-angle plug improves airflow inside the case.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.