We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 23 inch SATA cable with low-profile straight and right-angle connectors

SATACables

SATACables LP30SR584 SATA cable 23 inch low profile straight to right

SKU CH-K3GS-J4373

A 23-inch low-profile SATA III cable with a straight-to-right-angle connector for tight internal routing

  • SATA 3.0 delivers 6.0 Gbps throughput for fast storage performance
  • Low-profile right-angle connector improves airflow inside tight cases
  • Shielded cable with silver mesh blocks EMI and RFI interference
  • Flexible rubber sleeve bends and twists for clean cable routing
  • Backwards compatible with 1.5 Gbps SATA devices for broad device support

Cable design and purpose

The SATACables LP30SR584 is a 23 inch internal SATA cable with a straight connector on one end and a right-angle connector on the other. Its low-profile plugs and narrow yellow jacket suit tight spaces in desktops, notebooks and servers where standard cables would block adjacent ports or impede airflow.

Signal integrity and shielding

The cable meets the SATA revision 3.0 specification for up to 6.0 Gbps throughput and remains backwards compatible with 1.5 Gbps and 3.0 Gbps devices. A silver mesh shield and durable rubber sleeve protect the signal from EMI and RFI while allowing the cable to be bent or twisted during routing without damage.

Compatibility and installation check

Verify that your motherboard or controller has a standard SATA data port and that the target drive or optical unit uses a matching SATA connector. Ensure the right-angle orientation matches the clearance around the device port, and confirm the 23 inch length reaches between your host and device without strain.

Highlights

  • SATA 3.0 delivers 6.0 Gbps throughput for fast storage performance
  • Low-profile right-angle connector improves airflow inside tight cases
  • Shielded cable with silver mesh blocks EMI and RFI interference
  • Flexible rubber sleeve bends and twists for clean cable routing
  • Backwards compatible with 1.5 Gbps SATA devices for broad device support

Specifications

ModelLP30SR584

Questions about this item

Will the latching connectors on this 23 inch cable need replacement over time?

The low-profile straight and right-angle connectors use a standard SATA latching mould; they are rated for repeated insertion cycles and do not have a scheduled replacement interval.

What throughput ceiling appears first when this cable runs at SATA III 6.0 Gbps continuously?

The cable is specified for 6.0 Gbps (600 MB/s) point-to-point operation; the bus protocol itself is the first limit under sustained load.

Does the silver-mesh shielding on this 23 inch cable add heat or noise during all-day operation?

The passive shielded rubber sleeve carries no active components, so it generates no noise and adds no measurable heat inside the case.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.