We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow low-profile SATA cable, straight-to-right connectors, 5 inch length

SATACables

SATACables LP30SR127 5 inch Low Profile Straight to Right SATA Cable

SKU CH-3KN6-V4THT

Low-profile 5-inch SATA III cable with straight-to-right connectors for 6.0 Gbps data transfer

  • Supports 6.0 Gbps SATA III throughput for fast data transfer
  • Backwards compatible with 1.5 Gbps SATA devices for broad usability
  • Low-profile right-angle connector improves airflow inside the case
  • Shielded silver-mesh cable resists EMI and RFI interference
  • Vibration-resistant latch ensures a secure host-to-device connection

5 inch Low Profile SATA Cable

This 5 inch Low Profile Straight to Right SATA Cable connects a motherboard host port to a Serial ATA drive or optical device. It uses the SATA revision 3.0 interface for up to 6.0 Gbps throughput. The yellow low profile connectors suit tight spaces in notebooks and servers.

Replaces standard ribbon cables

The narrow cable design and right angle plug increase airflow inside the case for better cooling. The jump is worth it when clearance around the drive bay is limited or when EMI shielding is required for signal integrity. Durable flexible rubber sleeve can be bent twisted shaped for clean routing.

Fits internal point to point bus connections

Cables are shielded to protect against EMI/RFI with silver meshing and latching standard mold connectors. Backwards compatible with Serial ATA 1.5Gbps devices. Not for builders who need longer runs or straight to straight orientation. Suits both PC Notebook & Server environments.

Highlights

  • Supports 6.0 Gbps SATA III throughput for fast data transfer
  • Backwards compatible with 1.5 Gbps SATA devices for broad usability
  • Low-profile right-angle connector improves airflow inside the case
  • Shielded silver-mesh cable resists EMI and RFI interference
  • Vibration-resistant latch ensures a secure host-to-device connection

Specifications

ModelLP30SR127

Questions about this item

What clearance does the low-profile right-angle connector need at the drive end?

The right-angle plug sits close to the drive chassis, so allow roughly the cable diameter plus the connector body behind the drive bay for the 30 cm length to route cleanly.

Which orientation do I plug in first to avoid stressing the latch on the straight host connector?

Seat the straight end into the motherboard port until the latch clicks, then route the flexible sleeved cable to the right-angle device end and press it onto the drive.

How often should I check the silver-mesh shielding and rubber sleeve for wear in a server that vibrates?

Inspect the shielding mesh and sleeve during any drive swap or annual maintenance; replace the cable if the mesh is frayed or the sleeve shows cracks from repeated flexing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.