We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 20-inch eSATA extension cable with straight male-to-female connectors

SATACables

SATACables iLEXT-3-24in eSATA cable 20 inch red

SKU CH-ZX90-13T04

Red 20-inch eSATA extension cable with male-to-female connectors extends SATA I or SATA II data links up to 1.66 ft

  • ColorRed
  • Length21" - 25"
  • Cable Length1.66 ft.
  • Connector Number2
  • StyleStraight
  • Extends SATA I and SATA II cables with male-to-female connectors
  • 20-inch red cable reaches drives in tight chassis layouts
  • 26 AWG solid tinned copper conductors maintain signal integrity
  • Gold-plated contacts rated at 15 micro-inches resist corrosion
  • 100 ohm controlled impedance supports 150/300 MB/s data rates

Red 20 inch eSATA extension cable

This red eSATA extension cable adds length between a host port and a SATA I or SATA II device. It carries a straight male connector on one end and a straight female connector on the other. The 1.66 ft cable suits bench testing, drive docking and permanent internal routing where the stock lead falls short.

Straight male to female connectors install

Push the male end into the motherboard or controller port and attach the existing drive cable to the female end. No tools, drivers or orientation tricks are required. The 26 AWG solid tinned copper conductors and hot-melt aluminium Mylar spiral shielding keep attenuation at 6 dB max from 10 MHz to 4500 MHz, so signal integrity stays intact across the added length.

Check port type and clearance before ordering

Verify the host port is a standard 7 pin SATA or eSATA socket; the cable will not fit proprietary or mini variants. Ensure 2.2 mm by 7.80 mm jacket clearance around the connector housing, which uses UL 94V-0 rated polyester and glass fibre. The assembly is rated to 80 degrees Celsius and 30 V, so confirm the chassis airflow and voltage environment match.

Highlights

  • Extends SATA I and SATA II cables with male-to-female connectors
  • 20-inch red cable reaches drives in tight chassis layouts
  • 26 AWG solid tinned copper conductors maintain signal integrity
  • Gold-plated contacts rated at 15 micro-inches resist corrosion
  • 100 ohm controlled impedance supports 150/300 MB/s data rates

Specifications

ModeliLEXT-3-24in
ColorRed
Length21" - 25"
Cable Length1.66 ft.
Connector Number2
StyleStraight

Questions about this item

How can I confirm the cable is carrying a reliable signal after I connect it?

After connecting the cable, verify that the drive is detected at the expected SATA I or SATA II transfer rate and that no data errors appear during read or write operations.

What comes with the cable and what must I supply myself?

The package includes the 20 inch red eSATA extension cable with a straight male connector on one end and a straight female connector on the other; you must provide the SATA I or SATA II data cables you intend to extend.

Which length should I choose for my setup?

This model is offered in a 20 inch length (approximately 1.66 ft); select it when you need a short internal extension between a motherboard or controller and a drive bay.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.