SATACables 30SS991YL 39 inch yellow SATA III cable with latch

39-inch SATA III cable with latch

This 39-inch yellow SATA III cable connects a Serial ATA drive or optical device to a motherboard or controller. The 30AWG double-shielded construction supports data rates up to 6.0 Gbps while the narrow profile simplifies routing and improves internal airflow. Both ends carry latching 7-pin female connectors for a secure fit. The cable meets Serial ATA 1.0 standards and above.

Builders needing a long internal link.

The 39-inch length suits full-tower cases or servers where drives sit far from the motherboard, and the yellow jacket helps identify the cable in a dense loom. The latch prevents accidental disconnection during drive swaps or vibration. Users with external eSATA ports or very compact chassis where a shorter cable is required should look elsewhere.

SATA revision 3.0 at 6.0 Gbps

The single specification that decides fit is the SATA revision 3.0 rating delivering up to 6.0 Gbps throughput. If the host controller or drive only operates at revision 1.0 or 2.0 speeds, the cable will still work but cannot exceed the slower device limit. Verify the controller and drive both support revision 3.0 to gain the full 6.0 Gbps potential.