We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow SATA III cable, 19 inch, latching connectors

SATACables

SATACables 30SS483YL Yellow SATA III Cable 19 inch Latch

SKU CH-DHKA-R188G

A 19 inch yellow SATA III cable with latching connectors supports up to 6.0 Gbps data transfer for drives and optical devices

  • Cable Length1.58 ft.
  • SATA III revision 3.0 delivers up to 6.0 Gbps throughput
  • Latching 7-pin connectors on both ends secure the link against vibration
  • 30 AWG double-shielded cable reduces EMI and RFI interference
  • Narrow 19-inch design simplifies routing and improves internal airflow
  • Lifetime replacement warranty backs long-term reliability

Yellow SATA III cable for internal drives

This 19-inch yellow SATA III cable connects Serial ATA hard drives, optical drives and other SATA devices to a motherboard or controller. The latching 7-pin female connectors on both ends secure the link against accidental disconnection. It suits desktop or server builds that need a short, colour-coded internal data link.

Thin shielded design aids airflow and signal quality

The 30AWG double-shielded construction reduces electromagnetic and radio-frequency interference while keeping the cable narrow. That profile simplifies routing inside a crowded chassis and leaves more room for air to move around components. In normal use the passive cable draws no power and adds no audible noise.

1.58 ft length sets the reach between device

At 1.58 feet the cable spans only short distances, so it fits best when the drive bay sits close to the SATA header. Builders needing longer runs between widely spaced bays and motherboard connectors should choose a different length.

Highlights

  • SATA III revision 3.0 delivers up to 6.0 Gbps throughput
  • Latching 7-pin connectors on both ends secure the link against vibration
  • 30 AWG double-shielded cable reduces EMI and RFI interference
  • Narrow 19-inch design simplifies routing and improves internal airflow
  • Lifetime replacement warranty backs long-term reliability

Specifications

Model30SS483YL
Cable Length1.58 ft.

Questions about this item

How do I install the 19 inch SATA III cable and what step do people often miss?

Route the narrow 30AWG cable between the drive and motherboard, then press each latching 7-pin connector until the latch clicks; the step most people miss is verifying both latches are fully engaged.

What maintenance or replacement will the yellow SATA III cable need later?

The double-shielded 30AWG construction and latching 7-pin connectors are rated for the life of the build; no periodic maintenance is required unless physical damage occurs.

What limit appears first on the 1.58 ft cable during sustained 6.0 Gbps transfers?

The 30AWG gauge and 19 inch length keep signal loss well within SATA 3.0 spec, so the first practical limit is the drive or controller throughput, not the cable itself.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.