We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow 16 inch SATA cable straight to right angle connector

SATACables

SATACables 30SR407YL 16in SATA III cable straight to right angle

SKU CH-H9ZG-GP1N4

16-inch yellow SATA III cable with straight and right-angle 7-pin connectors supports 6.0 Gbps throughput

  • SATA III 6.0 Gbps throughput for fast data transfer
  • Straight to right-angle connectors simplify tight-case routing
  • 16 inch length reduces cable clutter inside chassis
  • 30 AWG double-shielded construction preserves signal integrity
  • Yellow colour aids quick identification among other cables

16-inch SATA III cable for tight builds

This 16-inch yellow cable connects a Serial ATA drive to a motherboard or controller using a straight plug on one end and a right-angle plug on the other. It supports the SATA 3.0 specification for up to 6.0 Gbps throughput. The 30AWG double-shielded conductors keep the cable slim so it does not block airflow in crowded cases. It suits desktops or servers that run multiple drives and need reliable signal quality.

Replaces loose or straight-only cables in cramped

The right-angle connector lets the cable hug the drive or motherboard edge, saving space where a straight plug would press against a side panel or adjacent card. Upgrading from an older SATA II lead restores the full 6.0 Gbps link speed for modern SSDs and hard disks. The jump is worth it when cable routing is tight or when an existing lead shows intermittent errors on a 6 Gbps device.

Check port orientation and clearance before ordering

Verify that the host port and the device port can accept a right-angle plug pointing in the needed direction; some board layouts force the angle toward an obstruction. Ensure the 16-inch length reaches between your specific drive mount and the motherboard connector without tension. The cable uses standard 7-pin female ends, so it fits any SATA or eSATA port, but it will not work with drives that require a different power or data interface.

Highlights

  • SATA III 6.0 Gbps throughput for fast data transfer
  • Straight to right-angle connectors simplify tight-case routing
  • 16 inch length reduces cable clutter inside chassis
  • 30 AWG double-shielded construction preserves signal integrity
  • Yellow colour aids quick identification among other cables

Specifications

Model30SR407YL

Questions about this item

Will the 16 inch length and right-angle connector fit behind my drive cage?

The cable measures 16 inches end to end with one straight and one right-angled 7-pin SATA connector, so measure from your motherboard port to the drive bay to confirm clearance.

Do I need to align a key or latch when plugging the 7-pin connectors?

Each 7-pin SATA connector has an L-shaped key; insert it straight until the metal latch clicks — forcing it at an angle bends the fragile 30 AWG pins inside the double-shielded jacket.

How often should I replace this SATA III cable in a multi-drive server?

The 30 AWG double-shielded design is rated for the 6.0 Gbps SATA 3.0 spec; replace only if you see intermittent detection, CRC errors, or physical kinks near the right-angle bend.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.