We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Translucent USB 2.0 to FireWire 1394 4-pin cable, 1.8 m

SANOXY

SANOXY USB 2.0 to FireWire IEEE 1394 4-pin cable 1.8 m

SKU CH-8NA6-0CM19

Connects a 4-pin FireWire device to a USB 2.0 port for data transfer up to 480 Mbps without external power

  • Connect cameras via USB with 4-pin FireWire 1394 interface
  • Transfer data up to 480 Mbps using USB 2.0 full-speed 12 Mbps spec
  • Bus-powered operation eliminates need for external power adapter
  • Driver-free installation works immediately on compatible systems
  • Compact 1.8 m translucent cable for portable connectivity

USB-to-FireWire adapter cable

This SANOXY cable bridges a USB 2.0 port to a 4-pin IEEE 1394 device so you can transfer footage from a DV camera or other FireWire peripheral to a modern computer that lacks a native 1394 controller. It is aimed at videographers and hobbyists who need a simple link for legacy gear without installing an expansion card.

Bus-powered operation with USB 2.0 limits

The cable draws power directly from the USB port, eliminating the need for an external supply while complying with the USB 2.0 Full-Speed specification at 12 Mbps. IEEE 1394 signalling is also supported, so the link stays within the power budget of a standard port and produces no fan noise or heat of its own.

Driver-free connectivity for immediate transfers

No software or drivers are required; the operating system recognises the connection automatically, letting you start moving files at up to 480 Mbps right after plugging in. The translucent 1.8 m cord keeps the setup compact and portable for field or studio use.

Highlights

  • Connect cameras via USB with 4-pin FireWire 1394 interface
  • Transfer data up to 480 Mbps using USB 2.0 full-speed 12 Mbps spec
  • Bus-powered operation eliminates need for external power adapter
  • Driver-free installation works immediately on compatible systems
  • Compact 1.8 m translucent cable for portable connectivity

Specifications

BrandSANOXY

Questions about this item

How do I connect the 4-pin FireWire 1394 end to my camera and the USB 2.0 end to my computer?

Plug the 4-pin connector into the camera's iLink port, then insert the USB 2.0 plug into any free USB port; the cable draws power from the bus so no external adapter is needed.

Will the 4-pin FireWire connector or the USB 2.0 plug wear out first with repeated insertion cycles?

The 4-pin FireWire 1394 connector typically sees more mechanical stress from frequent camera docking, so it tends to loosen before the USB 2.0 end.

At what point does the 12 Mbps USB 2.0 Full-Speed limit become the bottleneck during a long video transfer?

The 12 Mbps USB 2.0 Full-Speed ceiling is reached immediately on any sustained capture, capping throughput well below the 480 Mbps marketing figure.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.