We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue shielded Cat6A patch cable with gold RJ45 connectors, 30ft length

SANOXY

SANOXY Cat6A Shielded STP Patch Cable 30ft 10Gbps 500MHz 26AWG Gold 50µ Blue

SKU CH-7CZK-YX8V3

Shielded Cat6A patch cord delivers 10Gbps at 500MHz over 30ft with 26AWG copper and 50µ gold RJ45 contacts

Length 30 ft.

Show 3 more configurations
  • Supports 10Gbps speeds for high-bandwidth applications
  • 500MHz bandwidth handles demanding network traffic
  • Shielded STP construction reduces electromagnetic interference
  • 50-micron gold-plated contacts resist corrosion long-term
  • Non-booted RJ45 design fits dense patch panels

Close-range patch cable

This 30 ft shielded Cat6A patch cord is built for short-run connections between patch panels, switches and side-by-side equipment. The non-booted RJ45 plugs fit high-density ports without crowding adjacent jacks. Pure bare copper conductors and 50-micron gold contacts keep signal loss low over the full length.

Shielded thermals and power

The STP foil and braid shield cuts electromagnetic interference and crosstalk in busy racks or offices packed with electronics. Stranded 26 AWG conductors stay flexible for tight bends while maintaining the 500 MHz bandwidth needed for 10 Gbps throughput. Passive copper construction draws no power and adds no heat or noise to the link.

Upgrade from unshielded Cat5e

Replacing unshielded Cat5e or Cat6 patch cords with this shielded Cat6A cable removes a common bottleneck when 10 Gbps ports are deployed. The jump is worth it in environments where alien crosstalk or EMI degrades throughput, or when port density demands the slimmer non-booted connector profile.

Highlights

  • Supports 10Gbps speeds for high-bandwidth applications
  • 500MHz bandwidth handles demanding network traffic
  • Shielded STP construction reduces electromagnetic interference
  • 50-micron gold-plated contacts resist corrosion long-term
  • Non-booted RJ45 design fits dense patch panels

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I plug the non-booted RJ45 connectors into a patch panel without damaging the tabs?

Align the connector with the port and press straight in until the latch clicks; the non-booted design saves space but leaves the tab exposed, so avoid angling the cable during insertion to prevent snapping the latch.

Will the gold-plated contacts need cleaning or re-plating over time?

The 50-micron gold plating resists corrosion under normal indoor use; no routine cleaning or re-plating is required — just keep the connectors dry and free of dust.

At what cable length does signal loss become noticeable at 10 Gbps?

This 30 ft stranded 26 AWG patch cord stays within the Cat6A channel limit for 10 Gbps up to 500 MHz; longer runs would require solid-conductor cable to maintain performance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.