We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 50 ft VGA male-to-male cable with dual ferrite cores

sakose

sakose VGA-50 50 ft VGA Male to Male Cable with Dual Ferrites

SKU CH-XG3D-71T98

A 50 ft VGA male-to-male cable with dual ferrites and double shielding for monitor connections

  • TypeVGA
  • ColorBlack
  • Length50 ft.
  • Connector Number2
  • Connector DetailVGA to VGA
  • Terminal GenderMale to Male

Cable Length 50 Feet

  • 50 ft length reaches distant displays
  • dual ferrites suppress EMI and RFI
  • double braid-and-foil shield protects signal integrity
  • UL 2919 rated for low-voltage safety
  • 28 AWG conductors with 3 coaxial and 4.5 twisted pairs

sakose VGA-50 50 ft VGA Cable

This 50 ft VGA male-to-male cable connects monitors, projectors or KVM switches to a graphics source. Dual ferrite cores and double braid-and-foil shielding meet UL 2919 for signal integrity over long runs. The 28 AWG conductors use three coaxial and 4.5 twisted-pair lines in a black jacket. It is a new, passive analog video link for legacy and industrial displays.

Who should use this cable

Installers needing a single 50 ft VGA run between a PC and a display will find the length and shielding suitable. Builders who require a shorter cable, a female connector or a digital interface such as HDMI or DisplayPort should look at a different product. Buyers wanting an active signal booster or plenum-rated jacket will not find those features here.

Specification that decides fit

The 50 ft length is the critical dimension; verify the exact distance between source and display before ordering. Excess slack adds bulk and potential interference, while a shortfall breaks the link. No other specification in the data overrides this physical constraint.

Highlights

  • 50 ft length reaches distant displays
  • dual ferrites suppress EMI and RFI
  • double braid-and-foil shield protects signal integrity
  • UL 2919 rated for low-voltage safety
  • 28 AWG conductors with 3 coaxial and 4.5 twisted pairs

Specifications

BrandBYTECC
ModelVGA-50
TypeVGA
ColorBlack
Length50 ft.
Connector Number2
Connector DetailVGA to VGA
Terminal GenderMale to Male
FeaturesDual Ferrites Double Shielded (braid & foil) to meet UL 2919 3 Coaxial & 4.5 Twisted Pairs 28 AWG Electronic Low Voltage Computer cable
Cable Length50 ft.

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the 50 ft VGA cable and what step is often missed?

Connect each male VGA connector to the matching port on the source and display, then secure the thumbscrews so the dual ferrites stay close to the ends for proper shielding.

What maintenance or replacement will the 50 ft VGA cable need later?

Inspect the double braid-and-foil shielding and the two ferrite cores periodically; replace the cable if the jacket shows cracks or the connectors become loose.

What limit appears first on the 50 ft VGA cable under sustained use?

Signal attenuation over the 50 ft length is the first limit, mitigated by the 28 AWG conductors, 3 coaxial plus 4.5 twisted-pair construction and dual ferrites meeting UL 2919.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.