We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft VGA male-to-male cable with dual ferrite cores

sakose

sakose VGA-10 10 ft VGA Male to Male Cable with Ferrites

SKU CH-8G4N-KJK24

A 10 ft black VGA male-to-male cable with dual ferrites and double shielding for monitor connections

  • TypeVGA
  • ColorBlack
  • Length10 ft.
  • Connector Number2
  • Connector DetailVGA to VGA
  • Terminal GenderMale to Male

Cable Length 10 Feet

  • Reduced interference with dual ferrite cores and double shielding
  • Reliable signal over distance using 3 coaxial and 4.5 twisted-pair conductors
  • Secure fit from male-to-male VGA connectors on both ends
  • Standard 10 ft length suits typical monitor-to-PC setups
  • Built to UL 2919 spec with 28 AWG low-voltage computer cable

VGA Male-to-Male Cable 10 ft

This 10 ft VGA cable connects a computer or laptop to a monitor, projector or KVM switch with a standard 15-pin VGA port. The male-to-male design suits home offices, classrooms and meeting rooms where legacy analogue video is still used.

Dual Ferrite Double Shielding

Two moulded ferrite cores and a braid-plus-foil shield suppress EMI and RFI along the full length. The construction meets UL 2919 with three coaxial and 4.5 twisted-pair conductors in 28 AWG.

10 ft Analogue Video Reach

The 10 ft length covers typical desk-to-display runs without signal boosters. Longer analogue links may need active extenders, and digital-only ports such as HDMI or DisplayPort require a separate adapter.

Highlights

  • Reduced interference with dual ferrite cores and double shielding
  • Reliable signal over distance using 3 coaxial and 4.5 twisted-pair conductors
  • Secure fit from male-to-male VGA connectors on both ends
  • Standard 10 ft length suits typical monitor-to-PC setups
  • Built to UL 2919 spec with 28 AWG low-voltage computer cable

Specifications

BrandBYTECC
ModelVGA-10
TypeVGA
ColorBlack
Length10 ft.
Connector Number2
Connector DetailVGA to VGA
Terminal GenderMale to Male
FeaturesDual Ferrites Double Shielded (braid & foil) to meet UL 2919 3 Coaxial & 4.5 Twisted Pairs 28 AWG Electronic Low Voltage Computer cable
Cable Length10 ft.

Other versions of this model

4 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the 10 ft length mean for monitor placement?

The cable spans 10 ft between a PC and a monitor, giving enough slack for desk routing without excessive coil.

How does the VGA interface limit the signal?

VGA carries analogue video only, so maximum resolution and refresh rate depend on the graphics card and monitor rather than the cable itself.

What do the dual ferrites and double shielding add to the installation?

Dual ferrites and braid-plus-foil shielding suppress EMI, allowing the 28 AWG conductors to meet UL 2919 over the full 10 ft run.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.