We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
sakose SATA to eSATA cable 36 inches two connectors

sakose

sakose SATA-136EO SATA to eSATA cable 36" 2 connectors

SKU CH-DG4M-W4ZE9

A 36-inch cable with two connectors links a SATA device to an eSATA port

  • TypeSerial ATA to e-SATA
  • Length36"
  • Connector Number2
  • Connect internal SATA drives to external eSATA ports
  • 36-inch cable provides flexible routing inside or outside the case
  • Two connectors link one drive to one host port
  • Serial ATA to e-SATA design supports standard SATA devices
  • New sakose cable ready for immediate installation

SATA to eSATA cable with two connectors

This cable links an internal SATA port to an external eSATA device using two connectors. It suits builders adding an external drive enclosure or docking station to a desktop system. The 36-inch length gives enough reach for typical tower layouts without excess slack.

Practical limits of the SATA and eSATA interface

The SATA and eSATA interface supports a maximum cable length of one metre, so this 36-inch cable stays within specification. Signal integrity can degrade beyond that limit, especially with older controllers. Shielding quality and connector fit also affect reliable data transfer rates.

What to check on your existing setup before ordering

Verify that your motherboard or add-in card provides an internal SATA port and that the external enclosure uses an eSATA port. Confirm the enclosure does not require a powered eSATA connector, which this cable does not supply. Ensure the 36-inch route fits your case cable-management path.

Highlights

  • Connect internal SATA drives to external eSATA ports
  • 36-inch cable provides flexible routing inside or outside the case
  • Two connectors link one drive to one host port
  • Serial ATA to e-SATA design supports standard SATA devices
  • New sakose cable ready for immediate installation

Specifications

BrandSAKOSE
ModelSATA-136EO
TypeSerial ATA to e-SATA
Length36"
Connector Number2

Questions about this item

Should I choose the 36-inch version or a different length for my external drive?

This cable is only offered at 36 inches, so select it when that reach matches the distance between your internal SATA port and the external eSATA device.

What does the 36-inch length mean once the cable is installed in my system?

It provides a 36-inch signal path between the internal SATA connector and the external eSATA port, allowing the drive to sit outside the chassis without signal loss.

Does the SATA to eSATA interface cap the transfer speed of my SSD?

The cable passes the native SATA signal to the eSATA port, so the practical ceiling is the SATA revision supported by your controller and drive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.