We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red SATA cable with locking latches, eighteen inches long

sakose

sakose SATA-118C SATA cable 18" red locking latch

SKU CH-3Y3K-D14DR

An 18-inch red SATA cable with locking latch for a secure drive connection

  • TypeSATA
  • ColorRed
  • Length18"
  • Connector Number2
  • FeaturesLower voltage signal level: The level of voltage to the Seri
  • Secure locking latch prevents accidental disconnection
  • 18 inch length fits standard drive-to-motherboard layouts
  • 150/300/600 MB/s transfer rates support fast data access
  • Low 500 mV signal voltage reduces power draw
  • Sturdy red cable construction ensures long-term durability

18-inch red SATA cable with locking latch

This 18-inch red SATA cable connects SATA hard drives or SSDs to motherboards. It supports SATA 150/300/600 transfer rates and uses a 500 mV differential signal. A locking latch secures the connection and the cable is built with durable materials for long-term use.

Builders needing a secure internal drive link

The locking latch prevents accidental disconnection inside cases with tight routing. Users requiring longer reach for full-tower layouts or external eSATA enclosures should consider a different cable length or type.

Locking latch for secure SATA connection

The integrated locking latch on each connector clicks into place, resisting vibration and cable tension that can unseat standard friction-fit plugs. This single feature determines whether the cable stays connected in dense or frequently moved builds.

Highlights

  • Secure locking latch prevents accidental disconnection
  • 18 inch length fits standard drive-to-motherboard layouts
  • 150/300/600 MB/s transfer rates support fast data access
  • Low 500 mV signal voltage reduces power draw
  • Sturdy red cable construction ensures long-term durability

Specifications

BrandSAKOSE
ModelSATA-118C
TypeSATA
ColorRed
Length18"
Connector Number2
FeaturesLower voltage signal level: The level of voltage to the Serial ATA is of differential 500 mV , and it's more suitable for PC's technical request than that of 5 Volt Parallel ATA, and it can save more power as well. Pin Pitch Advantage: Serial ATA connector includes a line of 7-Pin signal terminal and a line of 15-Pin power terminal. These two lines of terminals can be detached to the freestanding tie-in, therefore, it not only reduces its body size but also enlarge is trans-positional space. Transferring Speed Advantage: It almost has no potential to fasten the transferring speed of

Questions about this item

What SATA ports must my motherboard and drive provide for this cable to work?

The cable uses standard SATA data connectors on both ends, so the motherboard and drive each need a SATA data port.

Will this 18-inch cable limit the 600 MB/s speed of a SATA III SSD I already own?

The cable supports SATA 150, 300 and 600 MB/s rates, so it will not bottleneck a SATA III drive.

How can I verify the locking latch is engaged after I plug the cable in?

Push each connector until the latch clicks; a firm tug should not pull the plug free.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.