sakose
sakose SAS2927 SAS 29pin to 2x7pin Sata Power Cable 25
A 25-inch SAS 29-pin to dual 7-pin SATA power cable for connecting drives
- TypePower
- Length25"
- SpecificationsSerial Attached SCSI (SAS) 29pin to 2x7pin Sata and Power Co
- Connect SAS drives using a single 29pin cable
- Power two Sata devices from one 25" cord
- Reduce cable clutter with combined data and power
- New condition ensures reliable first-use performance
- Listed by manufacturer in 2026 for current compatibility
Power adapter cable for SAS drives
The SAKOSE SAS2927 converts a single 29-pin SAS connector into two 7-pin SATA power connectors. It lets you power a pair of SATA drives from a backplane or controller that only provides the combined SAS interface. The cable is 25 inches long and ships new.
Suited for dual-drive SAS backplanes
This cable serves builders who need to split one SAS power source into two SATA devices. It will not work for installations that require a straight-through 29-pin connection or for powering more than two drives. Buyers who need additional connectors should look at a different harness.
29-pin SAS to dual 7-pin SATA split
The defining specification is the 29-pin SAS plug that branches into two 7-pin SATA power leads. That single interface determines whether the cable matches your backplane or controller. Verify the pin layout on your hardware before ordering.
Highlights
- Connect SAS drives using a single 29pin cable
- Power two Sata devices from one 25" cord
- Reduce cable clutter with combined data and power
- New condition ensures reliable first-use performance
- Listed by manufacturer in 2026 for current compatibility
Specifications
| Brand | SAKOSE |
|---|---|
| Model | SAS2927 |
| Type | Power |
| Length | 25" |
| Specifications | Serial Attached SCSI (SAS) 29pin to 2x7pin Sata and Power Cord Cable |
Questions about this item
Will the SAS2927 cable connect my existing 29-pin SAS backplane to two SATA drives?
Yes, the SAS2927 cable converts a single 29-pin SAS connector into two 7-pin SATA data and power connectors for direct drive attachment.
How can I verify the SAS2927 is functioning correctly after installation?
Both connected SATA drives should appear in the system BIOS or operating system disk management without errors, confirming the 29-pin to dual 7-pin link is active.
Does the SAS2927 package include mounting brackets or drive screws?
The box contains only the 25-inch SAS 29-pin to 2x7-pin SATA power cable; no brackets, screws or additional adapters are supplied.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115353BTC
In stock
