We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black flexible FPC antennas with IPEX connectors

sakose

sakose 3-piece 2.4 GHz 4 dBi FPC IPEX network antenna

SKU CH-T6V3-6WWTM

Three flexible 2.4 GHz FPC antennas with IPEX connectors add 4 dBi gain to Wi-Fi modules

  • TypeM.2 Wi-FI Adapter
  • ColorBlack

Class N/A

Wireless Speed N/A

  • Covers 2.4 GHz wifi 2 networks with 2400-2500 MHz range
  • 4 dBi gain boosts signal strength for wireless links
  • 50 ohm impedance matches standard RF circuits for efficient transfer
  • 5 standing wave ratio keeps reflections low across the band
  • Flexible FPC panel with adhesive backing fits tight internal spaces

Three-piece 2.4 GHz IPEX antenna kit

This three-piece kit supplies flexible FPC antennas with IPEX connectors for 2.4 GHz wifi 2.4 devices. Each unit delivers 4 dBi gain across the 2400-2500 MHz band with 50 ohm impedance and 1.5 standing wave ratio. The set suits builders adding wireless to embedded boards, router modules or notebook upgrades.

Peel-and-stick FPC with IPEX plug

The 42 by 12 by .3 mm panels use adhesive-backed FPC material and ship with RG1.13 pigtails ending in IPEX heads. No soldering is required; simply route the thin cable and press the connector onto the matching socket. Take care not to kink the feeder or exceed the 10 W power rating during testing.

Verify connector generation and clearance

Confirm the host device uses a first- or fourth-generation IPEX socket before ordering. Ensure at least 42 by 12 mm of flat internal space for the panel and a path for the 5 cm pigtail. The linear-polarisation design works with 802.11 b/g/n MIMO systems but will not cover 5 GHz bands.

Highlights

  • Covers 2.4 GHz wifi 2 networks with 2400-2500 MHz range
  • 4 dBi gain boosts signal strength for wireless links
  • 50 ohm impedance matches standard RF circuits for efficient transfer
  • 5 standing wave ratio keeps reflections low across the band
  • Flexible FPC panel with adhesive backing fits tight internal spaces

Specifications

Brandsakose
TypeM.2 Wi-FI Adapter
ColorBlack

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How can I confirm the antenna is performing correctly after installation?

Measure signal strength across the 2400-2500 MHz band; a standing wave ratio at or below 1.5 and expected gain near 4 dBi indicate proper operation.

What items are included and what must I source separately?

The pack contains three FPC antennas with IPEX connectors and 5 cm RG1.13 pigtails; mounting adhesive is pre-applied, but the host device with a matching IPEX socket must be supplied by you.

Which version suits a 2.4 GHz Wi-Fi module needing 4 dBi gain and IPEX connection?

This single variant delivers 4 dBi gain, 50 ohm impedance and linear polarization on the 2.4 GHz band, matching modules that specify those exact parameters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.