We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic adapter cable with USB-C plug, SATA and IDE connectors, blue LED, external 12V power brick

Sabrent USB-DS12 USB-C to SATA/IDE Hard Drive Adapter 10TB

SKU CH-HH9S-NWCAC

Connects SATA and IDE drives up to 10 TB via USB-C at 5 Gbps with included 12 V power adapter

  • ColorBlack
  • Dimensions79.0 in x 60.0 in x 15.0 in
  • Weight3 ounces
  • Package ContentsPower Adapter, Power Cord , User Manual
  • Connect SATA and IDE drives via USB-C
  • 5 Gbps USB 3.2 Gen 1x1 interface
  • 12 V power adapter and Molex for 3.5 and 5.25 drives
  • Plug-and-play with blue power status LED
  • Supports Windows, macOS and Linux

Universal Drive Adapter

The Sabrent USB-DS12 connects SATA and IDE hard drives, solid-state drives and optical drives in 2.5, 3.5 and 5.25-inch form factors to a host computer through a USB-C port. It is built for technicians, archivists and anyone who needs to read legacy or current storage media without installing them internally. The adapter draws power from an included 12 V supply and a 4-pin Molex connector for larger drives.

Thermals And Power

The unit weighs three ounces and its plastic housing remains cool during typical cloning or backup tasks because the adapter itself consumes very little power. A blue LED indicates when the device is active, and the external power brick handles the spin-up current of 3.5 and 5.25-inch mechanisms so the host USB port is not overloaded.

Sustained Transfer Behaviour

The USB 3.2 Gen 1x1 interface runs at five gigabits per second, but actual throughput is limited by the attached drive’s SATA 3 Gbps link, yielding up to 0.625 gigabytes per second in steady use. This makes the adapter suitable for long imaging sessions or bulk file moves where consistent speed matters more than peak burst rates.

Highlights

  • Connect SATA and IDE drives via USB-C
  • 5 Gbps USB 3.2 Gen 1x1 interface
  • 12 V power adapter and Molex for 3.5 and 5.25 drives
  • Plug-and-play with blue power status LED
  • Supports Windows, macOS and Linux

Specifications

BrandSABRENT
ModelUSB-DS12
ColorBlack
Dimensions79.0 in x 60.0 in x 15.0 in
Weight3 ounces
Package ContentsPower Adapter, Power Cord , User Manual

Questions about this item

How do I connect a 3.5-inch IDE drive to the USB-DS12 and what step is often missed?

Attach the 4-pin Molex connector from the included 12V power adapter to the drive before plugging the USB-C cable into the host; the drive will not spin up without external power.

Which parts of the USB-DS12 kit may need replacement after extended use?

The 12V power adapter, the power cord, and the Molex connector are the only serviceable items; the adapter circuit board and integrated USB-C cable have no user-replaceable components.

What throughput ceiling appears first when copying large files continuously?

The SATA-II 300 MB/s interface limit is reached well before the USB 3.2 Gen 1x1 5 Gbps link saturates, so sustained transfers top out at the drive's native SATA speed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.