We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black SATA data cables, 20 inch straight connectors with metal locking latches

Sabrent CB-SFK3 SATA III 6 Gbit/s 20 in Black 3-pack

SKU CH-C4S7-T12E8

Three-pack of 20-inch straight SATA III cables with metal locking latches for 6 Gbit/s data links

  • TypeSATA
  • ColorBlack
  • Length20
  • Connector DetailOptical
  • Terminal GenderMale-to-Female
  • Speed6 gigabits_per_second
  • Secure data link with metal locking latch on straight connectors
  • SATA III compliant for 600 MB/s transfer speeds
  • Connects 2.5 SSDs, 3.5 HDDs and optical drives to motherboards
  • 20 inch length suits internal drive routing in standard cases
  • Three-pack provides cost-effective spares for builds and troubleshooting

Three-pack of 20-inch SATA III cables

This three-pack supplies 20-inch SATA III data cables rated for 6 Gbit/s transfer. Each cable uses straight connectors with a metal locking latch to secure the link to motherboards, host controllers or RAID cards. The set is intended for builders who need multiple internal drive connections in a single purchase.

Suits builders adding several drives.

The cables suit anyone installing 2.5 SSDs, 3.5 HDDs or optical drives where a secure, locking data path is required. They do not carry power, so a separate power connection from the PSU is still needed for every drive. Buyers who want a combined data-and-power cable or who need right-angle connectors should look at a different product.

20-inch length fixes reach between drive bays

At 20 inches each cable spans the typical distance from a mid-tower drive cage to the SATA headers on an ATX board. The fixed length means no slack to manage, but it also means the cable will not stretch to rear-mounted ports in larger enclosures. Measure your routing path before ordering.

Highlights

  • Secure data link with metal locking latch on straight connectors
  • SATA III compliant for 600 MB/s transfer speeds
  • Connects 2.5 SSDs, 3.5 HDDs and optical drives to motherboards
  • 20 inch length suits internal drive routing in standard cases
  • Three-pack provides cost-effective spares for builds and troubleshooting

Specifications

BrandSABRENT
ModelCB-SFK3
TypeSATA
ColorBlack
Length20
Connector DetailOptical
Terminal GenderMale-to-Female
Speed6 gigabits_per_second
FeaturesHigh Speed

Questions about this item

Do the 20-inch SATA III cables generate noticeable heat or draw extra power when running all day?

No — the cables carry only data signals at up to 6 Gbit/s and contain no active electronics, so they produce no measurable heat and draw no power of their own.

What must I already own for these straight SATA III cables with metal locking latches to work?

You need a motherboard or host controller with standard SATA ports and a 2.5 SSD, 3.5 HDD or optical drive that also has a SATA data connector; the drive itself requires a separate power connection from the PSU.

How do the 20-inch SATA III cables behave alongside older SATA drives I may keep?

They are fully compliant with the SATA III specification and backward compatible with SATA II and SATA I devices, so legacy drives will operate at their native speed while newer drives can reach up to 600 MB/s.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.