We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCB adapter card with four M.2 slots and aluminum heatsink cover

Sabrent

Sabrent 4-Drive NVMe M.2 PCIe 3.0 x4 Adapter Card

SKU CH-6NJ4-ZMNGS

Adds four NVMe SSDs through one PCIe 3.0 x4 slot with an aluminium heatsink, thermal pads and backward compatibility to PCIe 2.0 and 1.0

  • Add four NVMe SSDs through one PCIe 3.0 x4 slot
  • Aluminium heatsink with silicone pads keeps drives cool under load
  • Fits x4, x8 and x16 slots with PCIe 2.0 and 1.0 backward compatibility
  • Supports 512-byte maximum payload size for peak throughput
  • Includes M.2 2280 screws and screwdriver for quick installation

Four NVMe drives on one PCIe 3.0 x4 slot

The Sabrent adapter card fits M-Key 2280 NVMe SSDs and installs in x4, x8 or x16 PCIe slots. It includes M.2 screws and a screwdriver for straightforward installation. The card is backward compatible with PCIe 2.0 and 1.0 at their respective maximum bandwidths. It works with Windows 8.1+ or macOS 10.3.3+ for plug-and-play operation.

Sustained operation with software RAID or JBOD

The adapter supports a PCIe maximum payload size of 512 bytes to maintain throughput during extended transfers. Active State Power Management with L0s, L1, L23 and L3 states plus L1 sub-states keeps power draw controlled under continuous load. Latency Tolerance Reporting and Advanced Error Reporting provide stability for long-running arrays. Separate Reference Clock with Independent Spread further aids signal integrity.

Aluminum housing with thermal padding prevents

An integrated aluminum heatsink and silicone thermal pads dissipate heat from all four drives during normal use. The housing adds structural rigidity to protect the card and installed SSDs. Compliance with S3 and S4 sleep states allows the system to enter low-power modes without drive issues. This thermal design keeps performance consistent without active cooling.

Highlights

  • Add four NVMe SSDs through one PCIe 3.0 x4 slot
  • Aluminium heatsink with silicone pads keeps drives cool under load
  • Fits x4, x8 and x16 slots with PCIe 2.0 and 1.0 backward compatibility
  • Supports 512-byte maximum payload size for peak throughput
  • Includes M.2 2280 screws and screwdriver for quick installation

Specifications

BrandSABRENT

Questions about this item

Does the aluminum heatsink and thermal padding keep four NVMe SSDs cool during all-day operation?

The card includes an aluminum heatsink with integrated silicone thermal padding designed to maximise heat dissipation so drives do not throttle under sustained loads.

What PCIe slot and operating system are required to use all four M.2 2280 NVMe drives?

The adapter fits x4, x8 or x16 PCIe slots and works with Windows 8.1 or later and macOS 10.3.3 or later; M.2 screws and a screwdriver are included in the box.

Will the card run at PCIe 3.0 speeds in an older motherboard that only has PCIe 2.0 or 1.0 slots?

Yes, the adapter is backward compatible with PCIe 2.0 and 1.0 slots, operating at each generation's maximum bandwidth while still supporting a 512-byte maximum payload size.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.