We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small green circuit board with Bluetooth module and USB slot

Ruth's sister

Ruth's sister XFN0060 Bluetooth 12V MP3 WMA Decoder Board Audio Module USB TF Radio international power cord

SKU CH-HHGW-5JVD3

Bluetooth 12 V decoder board plays MP3, WMA and WAV from USB, TF card or FM radio with touch-tone control

  • Bluetooth 3.0 enables wireless music streaming from paired phones
  • 12 V power supply suits standard car electrical systems
  • MP3, WMA and WAV files play from USB or TF cards
  • FM radio reception built in for live broadcasts
  • 89 dB signal-to-noise ratio delivers clear audio output

Car MP3 Decoder Board

The Ruth's sister XFN0060 is a Bluetooth 12V decoder board that plays MP3 and WAV files from USB drives or TF cards. It adds wireless streaming and FM radio to a vehicle without a factory multimedia head unit. The module runs on external 12V power and includes a touch-tone control panel for track and volume adjustments.

Plastic Build With Touch Controls

A plastic chassis keeps the unit light for dashboard or under-seat mounting. The front panel provides direct buttons for source switching between USB, TF, Bluetooth, FM and line-in, plus playback, EQ, repeat and mute functions. Bluetooth3.0 EDR pairing enables wireless audio from a phone, while FAT16 and FAT32 support reads most common flash storage up to 320 KBPS bitrate.

Low-Power 12V Operation

The board draws power from the car's 12V supply and offers more than 20 hours of playback time on a typical battery-backed circuit. Signal-to-noise ratio is rated at 89dB for clean output to an external amplifier. No internal speakers or battery are fitted, so the module stays cool and silent during normal use. Power-off memory restores the last track and volume level at next start.

Highlights

  • Bluetooth 3.0 enables wireless music streaming from paired phones
  • 12 V power supply suits standard car electrical systems
  • MP3, WMA and WAV files play from USB or TF cards
  • FM radio reception built in for live broadcasts
  • 89 dB signal-to-noise ratio delivers clear audio output

Specifications

No published specifications for this item yet.

Questions about this item

What Bluetooth version does the XFN0060 use, and what audio quality does it cap at?

It uses Bluetooth3.0 EDR for wireless music play; the board decodes MP3 and WAV files at bit-rates from 32 to 320 KBPS.

What power input and storage slots does the module need to fit?

It runs on an external 12 V supply and accepts USB flash drives or TF cards formatted with FAT16 or FAT32.

How is the board installed, and which step is often missed?

Connect 12 V power, insert a USB or TF card, pair a phone over Bluetooth3.0, then press the mode button to select the source; users often forget to switch modes after pairing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.