We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue PCI-E riser board with USB 3.0 cable and SATA power connectors

Ruth's sister

Ruth's sister VER009S PCI-E riser power cable

SKU CH-HG7G-3KB82

PCI-E 1x to 16x riser with 60 cm USB 3.0 cable, four solid capacitors and SATA power connector

  • 60 cm USB 3.0 cable allows flexible GPU placement
  • SATA 15-pin to 6-pin power adapter simplifies PSU connection
  • Four FP solid capacitors stabilise graphics-card power delivery
  • Automatic anti-jam circuit protects the riser during operation
  • Dual LED indicators show power and activity status

PCI-E riser with USB 3.0 cable

This VER009S adapter extends a PCI-E x1 slot into a full x16 connector using a 60 cm USB 3.0 cable. It targets miners and builders who need to position graphics cards away from the motherboard in open-air frames or tight chassis. The board measures 122 by 45 by 13 mm and carries CE certification.

Dual 6-pin and 4-pin power inputs

The riser integrates one large 4-pin and two 6-pin connectors so the card can draw auxiliary power directly from the PSU without overloading the motherboard slot. Four solid capacitors on the board smooth the supply for steadier voltage delivery.

Automatic anti-jam circuit under load

A built-in protection circuit detects abnormal current and cuts power to prevent damage during sustained mining or compute workloads. Two onboard LEDs indicate status so operators can verify operation at a glance without additional tools.

Highlights

  • 60 cm USB 3.0 cable allows flexible GPU placement
  • SATA 15-pin to 6-pin power adapter simplifies PSU connection
  • Four FP solid capacitors stabilise graphics-card power delivery
  • Automatic anti-jam circuit protects the riser during operation
  • Dual LED indicators show power and activity status

Specifications

No published specifications for this item yet.

Questions about this item

How does the x16 slot on the riser perform when connected through the x1 USB 3.0 link?

The riser presents a physical x16 slot to the graphics card, but data runs over a single PCIe lane via the 60 cm USB 3.0 cable, so bandwidth is limited to x1 speeds.

What power connectors does the SATA 15-pin cable provide for the riser board?

The included SATA power cable terminates in one large 4-pin and two 6-pin connectors, giving three ways to feed the board.

Will the 122 mm by 45 mm board with 13 mm height fit inside a standard mining frame slot?

The board measures 122 x 45 x 13 mm, so it occupies a single-slot profile and should mount in typical riser brackets.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.