We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCI-E 1x to 16x riser board with 60cm USB 3.0 cable and 6-pin Molex power connector

Ruth's sister

Ruth's sister VER007 60cm PCI-E riser internal power cable

SKU CH-2YXW-3ZWWB

A PCI-E 1x to 16x riser kit with a 60 cm USB 3.0 cable, four solid capacitors and a SATA 15-pin to 6-pin power adapter for mining rigs

  • Extends graphics cards 60 cm via USB 3.0 cable
  • Four solid capacitors stabilise GPU power delivery
  • SATA 15-pin to 6-pin cable reduces motherboard load
  • Gold-plated contacts ensure reliable long-term connectivity
  • Fits 1x, 4x, 8x and 16x PCI-E slots

PCI-E 1x to 16x riser kit

The VER007 package converts a single PCI-E 1x slot into a 16x physical connector using a 60cm USB 3.0 cable. It includes the riser board, a 1x adapter, the extender cable and a SATA 15pin male to 6pin power cable. The kit is aimed at miners building multi-GPU rigs for BTC, LTC or ETH. No driver installation is required.

60cm USB 3.0 extender length

The 60cm cable sets the maximum spacing between the motherboard slot and the graphics card. Four solid capacitors on the riser board stabilise the graphics power delivery. Gold-plated contacts on both cards improve connectivity and service life. A side clip secures the mounted card in place.

Sustained mining load stability

Four solid capacitors and the dedicated SATA-to-6pin power cable reduce the electrical burden on the motherboard during continuous operation. The USB 3.0 link maintains signal integrity over the 60cm run under constant throughput. The assembly is designed for 100% duty-cycle mining workloads rather than intermittent gaming sessions.

Highlights

  • Extends graphics cards 60 cm via USB 3.0 cable
  • Four solid capacitors stabilise GPU power delivery
  • SATA 15-pin to 6-pin cable reduces motherboard load
  • Gold-plated contacts ensure reliable long-term connectivity
  • Fits 1x, 4x, 8x and 16x PCI-E slots

Specifications

No published specifications for this item yet.

Questions about this item

Does the 60 cm USB 3.0 cable limit bandwidth in a mining rig?

The extender uses a 60 cm USB 3.0 cable to carry PCI-E 1x signals, so the link runs at PCI-E 1x speed regardless of the 16x slot on the riser card.

What does the SATA 15-pin to 6-pin power cable actually deliver?

It converts a SATA 15-pin connector from the power supply into a 6-pin plug that feeds the riser card, moving GPU power draw off the motherboard.

Will the 12.8 cm by 4.3 cm riser card fit inside a standard mining frame?

The card measures 12.8 cm by 4.3 cm by 1.5 cm and includes a side clip, so it mounts on typical open-air frames with standard slot spacing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.