We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ruth's sister

Ruth's sister USB 3.1 Type-C to 2.0/2.5mm pitch elbow cable 30cm

SKU CH-98VA-7GW91

Connects a USB 3.1 Type-C header to 2.0 mm or 2.5 mm pitch terminals with a 30 cm elbow cable

  • USB 3.1 speed for fast data transfer
  • 30 cm length fits tight internal spaces
  • Elbow connector eases routing in compact cases
  • Dual 2.0 mm and 2.5 mm pitch fits more headers

Internal USB 3.1 Type-C elbow cable

This 30 cm cable adapts a USB 3.1 Type-C header to a 2.0 mm or 2.5 mm pitch terminal block. The right-angle elbow keeps the connection low-profile inside tight chassis. Builders wiring front-panel or add-in Type-C ports use it to bridge motherboard headers and custom breakout boards. It suits DIY enclosures and embedded systems where a straight connector would foul nearby components.

Sustained signal integrity over 30 cm

The short 30 cm run limits voltage drop and crosstalk during continuous USB 3.1 data transfers. Gold-plated contacts resist oxidation so resistance stays stable under prolonged load. The elbow strain relief reduces fatigue on the header pins when the chassis vibrates. Installers who need longer reach or a different pitch must choose an alternative cable.

Highlights

  • USB 3.1 speed for fast data transfer
  • 30 cm length fits tight internal spaces
  • Elbow connector eases routing in compact cases
  • Dual 2.0 mm and 2.5 mm pitch fits more headers

Specifications

No published specifications for this item yet.

Questions about this item

Does the elbow connector run warm or draw noticeable power when the cable is in use all day?

The cable is a passive USB 3.1 Type-C to 2.0/2.5 mm pitch elbow assembly with no active electronics, so it generates no heat and draws no power of its own.

What motherboard header or device must I already have for the 2.0/2.5 mm pitch terminals to plug into?

You need a motherboard or controller that provides a 2.0 mm or 2.5 mm pitch internal USB header matching the terminal spacing on the cable's elbow end.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.