We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular digital thermostat unit with LED display and relay terminals

Ruth's sister

Ruth's sister STC-1000 internal power cable 12V 24V 220V

SKU CH-B747-GBRK1

LED digital thermostat controls incubator temperature with heating and cooling relays for 12 V, 24 V and 220 V operation

  • Digital thermostat controls incubator temperature precisely
  • Dual relay output manages heating and cooling cycles
  • Wide voltage support covers 12 V, 24 V and 220 V supplies
  • LED display shows real-time readings clearly

LED Digital Thermostat for Temperature Control

The Ruth's sister STC-1000 is an LED digital thermostat designed to regulate temperature for incubators and similar environments. It operates as a thermoregulator with relay switching for both heating and cooling devices. The unit supports input voltages of 12 V, 24 V and 220 V for flexible installation.

Suits incubator builds needing dual-mode relay

This controller suits hobbyists and builders managing incubator temperatures who need a single device to switch heating and cooling loads. It is not for users requiring programmable ramping, data logging or multi-stage profiles. Buyers needing higher current capacity or additional sensor inputs should look elsewhere.

Highlights

  • Digital thermostat controls incubator temperature precisely
  • Dual relay output manages heating and cooling cycles
  • Wide voltage support covers 12 V, 24 V and 220 V supplies
  • LED display shows real-time readings clearly

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the STC-1000 thermostat is regulating temperature correctly after wiring it to a 220 V supply?

Power the unit, set the target temperature, then watch the LED display show the live reading; the relay will click and the heating or cooling output will activate when the measured temperature crosses your set point.

What comes with the STC-1000 controller and what must I source separately for a 12 V or 24 V installation?

The box contains the STC-1000 thermostat unit only; you must supply the 12 V, 24 V or 220 V power source, the temperature probe, and the heating or cooling loads you intend to switch.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.