We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short black adapter cable with SAS and SATA connectors

Ruth's sister

Ruth's sister SAS to SATA Adapter Cable 587747-002 internal power cable

SKU CH-N121-NBY00

Adapts a SAS drive to a SATA connector for HP Z-series and XW-series workstations using an LSI 9212 card

  • Connect SAS drives to SATA ports using PN 587747-002
  • Works with XW6400 XW6600 XW8400 XW8600 Z400 Z420 Z210 workstations
  • Enables SAS HDD installation with LSI9212 SAS card
  • Converts SAS interface to SATA connector for drive compatibility
  • New condition cable adapter ready for internal use

SAS-to-SATA adapter for HP workstations

This cable adapts a SAS connector to a SATA interface using part number 587747-002. It is designed for internal drive installations in HP workstation models including the XW6400, XW6600, XW8400, XW8600, Z400, Z420 and Z210. The adapter enables a SATA hard drive to connect to the system's SAS backplane or controller.

Suited for LSI 9212 SAS card upgrades

Installers fitting SAS drives into the listed workstations with an LSI 9212 SAS card will find this adapter matches the required pin-out. Builders working on other platforms, or those needing a direct SAS-to-SATA connection without this specific part number, should verify compatibility before purchasing.

Part number 587747-002 identifies the correct

The manufacturer part number 587747-002 is the single specification that confirms this adapter matches the wiring expected by the supported HP workstations and the LSI 9212 SAS card. Using a different part number risks an incorrect signal mapping and drive detection failure.

Highlights

  • Connect SAS drives to SATA ports using PN 587747-002
  • Works with XW6400 XW6600 XW8400 XW8600 Z400 Z420 Z210 workstations
  • Enables SAS HDD installation with LSI9212 SAS card
  • Converts SAS interface to SATA connector for drive compatibility
  • New condition cable adapter ready for internal use

Specifications

No published specifications for this item yet.

Questions about this item

Does the 587747-002 adapter generate extra heat when the SAS drive runs continuously?

The passive 587747-002 cable adds no active components, so it does not increase heat or power draw beyond the drive itself.

Which power connector must my PSU provide for this 587747-002 adapter to work?

Your power supply needs a standard SATA power plug; the 587747-002 converts only the data interface from SAS to SATA.

Will the 587747-002 let me keep my XW8400 workstation and LSI9212 card when I add a SATA drive?

Yes, the 587747-002 is listed for XW8400 systems using the LSI9212 SAS card to attach SATA drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.