We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black ABS back-button attachment with 14 keys and turbo for PS4 controller

Ruth's sister

Ruth's sister PS4 Controller Back Button Attachment 14 Keys Turbo M1 M2

SKU CH-V2Q3-ZZZWH

Adds 14 programmable rear buttons with turbo function to a PS4 controller for custom mapping

  • 14 rear buttons with turbo mapping for faster inputs
  • Plug-and-play design works instantly with PS4 controllers
  • ABS construction rated for long-term durability
  • Ultra-low 15 µA draw preserves controller battery life
  • M1 and M2 profiles store custom button layouts

What it is

The Ruth's sister back-button attachment adds 14 programmable keys to a PS4 controller, including face buttons, stick clicks, shoulder triggers and a dedicated turbo toggle. It clips onto the existing gamepad so players can remap functions without taking their thumbs off the sticks.

Sustained behaviour

The unit draws less than 15 µA while active and drops below 30 µA in standby, so battery drain stays minimal during long sessions. Turbo mode repeats the assigned input as long as the key is held, and the mapping is retained until the five-second SET clear sequence is performed.

Install and pitfalls

Setup is plug-and-play: snap the paddle onto the controller, then long-press SET for two seconds to enter pairing mode and assign each rear key to a target button. A common stumble is forgetting the flash-order sequence — cross, R3, L3, R2, L2, R1, L1 — which causes the mapping to bind to the wrong function.

Highlights

  • 14 rear buttons with turbo mapping for faster inputs
  • Plug-and-play design works instantly with PS4 controllers
  • ABS construction rated for long-term durability
  • Ultra-low 15 µA draw preserves controller battery life
  • M1 and M2 profiles store custom button layouts

Specifications

No published specifications for this item yet.

Questions about this item

Does the attachment draw noticeable power from the PS4 controller during long sessions?

It runs on less than 15 µA working current and under 30 µA leakage, so the extra drain on the controller battery is negligible.

What must I already own to use this 14-key back button attachment?

A standard PS4 DualShock 4 controller is required; the unit plugs directly into the controller’s extension port with no separate power supply.

Will the M1 and M2 programmable paddles work with older PS4 games that lack native paddle support?

Yes — the attachment maps any of the 14 keys including M1 and M2 to existing controller buttons, so older titles see only standard inputs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.