We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black internal power cable with 4-pin CPU, 6-pin GPU and flat 4-pin connectors, 240W rating

Ruth's sister

Ruth's sister PC9058 240W internal power cable

SKU CH-7BGG-M2X6E

A 240 W internal power cable with 4-pin, 6-pin and flat 4-pin connectors for HP small-form-factor desktops and workstations

  • 240 W output powers compatible SFF workstations reliably
  • Passive PFC design suits 100-264 V input range
  • 4-pin CPU plus 6-pin GPU and flat 4-pin connectors included
  • Fits HP 6000 6200 6300 8000 8100 8200 SFF chassis
  • Replaces spare part numbers 503375-001 508151-001 503376-001 508152-001

Dedicated HP 240W PSU cable

This internal power cable is a 240W PSU unit designed for HP small-form-factor desktops such as the 6000, 6200, 6300, 8000, 8100 and 8200 series. It carries part number PC9058 and matches spare numbers 503375-001, 503376-001, 508151-001 and 508152-001. The non-modular cable delivers a 4-pin CPU connector, a 6-pin graphics connector and a flat 4-pin connector. It operates on 100-264V input with passive PFC.

Suits HP SFF maintenance; not for ATX builds

Technicians servicing compatible HP Z200, 4000, 6000, 6005, 6200, 8000, 8100 or 8200 SFF chassis will find the correct pin-out and form factor here. Builders assembling standard ATX systems or proprietary non-HP workstations should look elsewhere because the connector layout and physical dimensions are specific to the listed HP platforms. The unit is sold as used but working in good condition.

240W capacity for entry HP desktops

The 240W output comfortably handles the original CPU, integrated graphics and basic peripherals shipped in these SFF models. Adding a discrete graphics card that requires more than the single 6-pin 12V connection or upgrading to a higher-wattage CPU will exceed the available headroom. The passive PFC design and fixed cable set limit use to the intended replacement scenario.

Highlights

  • 240 W output powers compatible SFF workstations reliably
  • Passive PFC design suits 100-264 V input range
  • 4-pin CPU plus 6-pin GPU and flat 4-pin connectors included
  • Fits HP 6000 6200 6300 8000 8100 8200 SFF chassis
  • Replaces spare part numbers 503375-001 508151-001 503376-001 508152-001

Specifications

No published specifications for this item yet.

Questions about this item

Does my HP small-form-factor chassis need a specific motherboard header for this 240W cable's 4-pin CPU connector?

The cable uses a standard 4-pin CPU power connector that fits the matching header on compatible HP 6000, 6200, 6300, 8000, 8100 and 8200 SFF motherboards.

Will the 6-pin graphics connector on this cable work with an older GPU that only has a 6-pin socket?

Yes, the cable provides a single 6-pin 12V graphics connector that mates directly with legacy cards requiring a 6-pin power input.

How can I verify the cable is delivering power correctly once installed?

The system should POST and boot normally; the PSU fan spins and the motherboard receives both 4-pin CPU and 6-pin GPU power without error beeps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.