We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal PSU unit with side fan grille and cable bundle

Ruth's sister

Ruth's sister PC8061 internal power cable

SKU CH-8FTD-FH2H0

180W ATX power supply with 20-pin, 4-pin and three SATA connectors for compatible Lenovo desktops

  • 180 W output powers legacy desktops and servers
  • Active PFC corrects power factor across 100-264 V input
  • 20-pin ATX, 4-pin CPU and three SATA connectors included
  • Non-modular design keeps cabling simple for ATX chassis
  • 150 × 100 × 86 mm unit fits standard ATX mounting

180 W ATX power supply for legacy desktops

This 180 W ATX unit is built for older desktop platforms that require the PC8061 form factor. It suits repair technicians and hobbyists restoring systems where the original supply has failed. The non‑modular design keeps cabling fixed and installation straightforward.

Active PFC with 100‑264 V input range

Active power‑factor correction helps maintain efficient draw across the full 100‑264 V operating window. The 4‑pin CPU connector and single 20‑pin main connector deliver power without extra adapters. No PCIe graphics connectors are present, limiting use to integrated‑graphics configurations.

Fixed cables include three SATA connectors

The harness provides three SATA power leads for drives and a single 4‑pin CPU lead alongside the 20‑pin motherboard plug. Physical dimensions of 150 × 100 × 86 mm match the ATX mounting pattern used by the compatible models listed. Builders needing PCIe power or higher wattage must select a different unit.

Highlights

  • 180 W output powers legacy desktops and servers
  • Active PFC corrects power factor across 100-264 V input
  • 20-pin ATX, 4-pin CPU and three SATA connectors included
  • Non-modular design keeps cabling simple for ATX chassis
  • 150 × 100 × 86 mm unit fits standard ATX mounting

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the PC8061 power supply and what step is often missed?

Mount the 150 × 100 × 86 mm unit in an ATX bay, connect the 20-pin main, 4-pin CPU and three SATA leads, then set the 100-127 V / 200-240 V switch to match local mains before powering on.

What maintenance or replacement will the PC8061 need later?

Clean dust from the intake and exhaust areas periodically; the non-modular cables cannot be swapped individually, so a failed rail or damaged connector means replacing the whole 180 W unit.

What limit appears first when the PC8061 runs under sustained load?

The 180 W total output ceiling is reached before any single rail limit, so continuous draw near that level will trigger protection or voltage drop.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.