Ruth's sister
Ruth's sister PA-2221-3 internal power cable 10pin 31cm + 4pin 60cm
A 210W server power supply with a 10-pin motherboard connector and a 4-pin CPU connector
- 210W output powers M410 E75S servers reliably
- Active PFC corrects input from 100-264V
- 10-pin motherboard connector with 31cm cable reach
- 4-pin CPU connector with 60cm cable length
- Non-modular design fits PA-2221-3 FRU 00PC746
Purpose-built server replacement
This internal power cable set replaces the PA-2221-3 unit in compatible servers such as the M410 E75S. It delivers 210 W through a 10-pin motherboard connector measuring 31 cm and a 4-pin CPU connector measuring 60 cm. The non-modular design matches the original FSP210-20TGBAB layout.
Fits specific proprietary chassis
It suits technicians restoring a system that uses the 00PC746 material code and the HK310-71PP pin-out. Builders working with standard ATX motherboards or modular power supplies should look elsewhere because the fixed cables and proprietary 10-pin pin-out will not connect.
Proprietary 10-pin motherboard connector
The single specification that decides fit is the 10-pin motherboard power interface on a 31 cm lead paired with a 4-pin CPU lead of 60 cm. If the target board requires a different pin count or cable length the set will not work.
Highlights
- 210W output powers M410 E75S servers reliably
- Active PFC corrects input from 100-264V
- 10-pin motherboard connector with 31cm cable reach
- 4-pin CPU connector with 60cm cable length
- Non-modular design fits PA-2221-3 FRU 00PC746
Specifications
No published specifications for this item yet.
Questions about this item
How do I fit the 10-pin motherboard connector and the 4-pin CPU connector into a Lenovo M410 or E75S chassis?
Route the 31 cm 10-pin lead to the mainboard header first, then run the 60 cm 4-pin lead to the CPU socket; the short 10-pin reach is the step most builders miss.
Which part of the PA-2221-3 cable assembly is most likely to need replacement after extended use?
The 10-pin and 4-pin connectors and their crimped wires are the only serviceable items; the unit has no fan or modular sockets to wear out.
What thermal or electrical limit appears first when the 210 W supply runs continuously at full load?
The 210 W output ceiling is the first hard limit; sustained draw above that trips the internal protection.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



