We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red PCI POST card with four-digit LED display

Ruth's sister

Ruth's sister M.2 SSD to PCI-E internal power cable

SKU CH-DMQG-AYWPA

A POST diagnostic card with four-digit LED display for motherboard troubleshooting

  • Diagnose boot failures with four-digit POST code display
  • Covers Phoenix BIOS 4.01 to 6.0 and Award BIOS 4.51
  • Compact 80×60 mm card fits any PCI slot
  • Red LED readout sized 50×20×7 mm for clear codes
  • Includes English manual with error code lookup table

M.2 SSD to PCI-E power cable

This cable connects an M.2 solid-state drive to a PCI Express slot for power delivery. It suits builders adding M.2 storage to a desktop board that lacks a native M.2 power feed. The adapter uses a PCIe connector on one end and an M.2 power interface on the other. No other components are included in the package.

System testers and repair technicians

The product is intended for users who need to supply power to an M.2 drive via a PCIe slot. It does not serve technicians who require a POST diagnostic card with LED error-code display, as this cable has no diagnostic circuitry. Buyers wanting a four-digit POST analyser for motherboard troubleshooting should look at a different tool. This cable only provides a power path.

PCIe to M.2 power interface

The cable bridges a PCI Express slot and an M.2 drive power connector. It carries no data signals and does not convert PCIe lanes to M.2 protocol. The connector layout follows the standard PCIe pin-out for power delivery. No other interface or protocol is supported by this adapter.

Highlights

  • Diagnose boot failures with four-digit POST code display
  • Covers Phoenix BIOS 4.01 to 6.0 and Award BIOS 4.51
  • Compact 80×60 mm card fits any PCI slot
  • Red LED readout sized 50×20×7 mm for clear codes
  • Includes English manual with error code lookup table

Specifications

No published specifications for this item yet.

Questions about this item

Does the 80 mm by 60 mm POST card draw enough power to raise case temperature during continuous use?

The card draws only the small current supplied by the PCI slot, so it adds negligible heat inside the chassis.

Which motherboard firmware versions must the system already run for the card to display codes?

The analyzer works with Phoenix BIOS 4.01 to 6.0, AMI BIOS 6.24 and Award BIOS 4.51.

Will the red 50 mm LED display show codes on a Dell 640 or Toshiba 4030 laptop motherboard?

Yes, the supported list includes Dell 640, Toshiba 4030 and the T20 through T23 and A20 through A22 series.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.