We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Internal power cable with small connector for 50x50mm Sunon blower fan

Ruth's sister

Ruth's sister internal power cable for Sunon 5020 GB1205PKV3-8AY 12V 1.1W 1.4W 50x50x20mm

SKU CH-6F36-1HQBS

Connects power to Sunon 5020 GB1205PKV3-8AY 12V centrifugal cooling fans measuring 50x50x20mm

  • Designed for Sunon 5020 blower fans
  • Supports 12V operation at 1.1W or 1.4W
  • Fits 50x50x20mm centrifugal cooling units
  • New internal power cable for projector cooling

Internal power cable for Sunon 5020 blower fan

This cable is made to connect a Sunon 5020 GB1205PKV3-8AY 12 V centrifugal blower fan to a power source. It suits builders or technicians who need a direct replacement lead for that specific fan model. The item is supplied new and matches the fan's 12 V rating. No other fan models are supported by this cable.

Power delivery for 1.1 W and 1.4 W variants

The cable carries 12 V DC to fans rated at 1.1 W or 1.4 W. In normal use it handles the low current draw of these blower units without noticeable voltage drop. The fan itself is a 50 x 50 x 20 mm centrifugal projector type, so cooling performance and noise depend on that fan, not on the cable. The lead adds no active components or resistance that would affect thermals.

Highlights

  • Designed for Sunon 5020 blower fans
  • Supports 12V operation at 1.1W or 1.4W
  • Fits 50x50x20mm centrifugal cooling units
  • New internal power cable for projector cooling

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the two-pin header on this cable to the Sunon 5020 GB1205PKV3-8AY fan?

Align the connector with the fan's two-pin header, matching the 12 V and ground pins, then press straight in until the latch clicks; forcing it at an angle bends the pins and prevents the fan from starting.

When should I replace this power cable for the Sunon 5020 blower fan?

Replace the cable if the insulation cracks, the connector pins discolour from heat, or the fan draws 1.1 W or 1.4 W intermittently because of a loose crimp.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.