We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
FTDI USB to RS232 serial adapter cable with RJ12 6P6C connector

Ruth's sister

Ruth's sister Internal Power Cable for SRNC ML2430

SKU CH-FD07-C8J12

Connects a USB port to an SRNC ML2430 solar charger via RS232 serial and RJ12 6P6C using an FTDI chipset

  • FTDI chipset ensures reliable USB-to-serial conversion
  • RS232 to RJ12 6P6C interface connects solar charger controllers
  • Designed for SRNC ML2430 MPPT compatibility
  • New condition guarantees unused, factory-fresh quality

FTDI USB RS232 adapter for SRNC ML2430

This FTDI USB RS232 serial adapter connects a computer to the SRNC ML2430 solar charge controller via an RJ12 6P6C port. It is built for installers and system owners who need to monitor or configure the MPPT charger through a standard USB interface. The cable provides a direct link for data logging and parameter changes without extra hardware.

Sustained communication over USB serial link

During extended monitoring sessions the FTDI chipset maintains a stable RS232 connection to the controller. The link supports continuous data streams for charge-status logging and firmware updates without drop-outs caused by brief signal glitches. It is not suited for installations that require wireless or Ethernet-based remote access.

Highlights

  • FTDI chipset ensures reliable USB-to-serial conversion
  • RS232 to RJ12 6P6C interface connects solar charger controllers
  • Designed for SRNC ML2430 MPPT compatibility
  • New condition guarantees unused, factory-fresh quality

Specifications

No published specifications for this item yet.

Questions about this item

Does the FTDI USB RS232 adapter draw enough power to heat up during continuous logging with the SRNC ML2430 solar charger?

The adapter is powered directly from the USB port and uses the low-power FTDI chipset, so it stays cool even during 24/7 serial communication with the controller.

What existing port must my computer already have to use this FTDI USB RS232 to RJ12 cable with the SRNC ML2430?

Your computer needs a standard USB Type-A port; the cable plugs in there and presents a virtual COM port for the RJ12 connection to the solar charger.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.