We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black modular cable set for 600W Flex ITX PSU

Ruth's sister

Ruth's sister internal power cable for 600W Flex ITX PSU

SKU CH-0ZSV-500CP

Cable kit connects a fully modular 600 W Flex ITX PSU to motherboard, CPU, graphics and SATA devices

  • Designed for 600W continuous output at 40°C
  • Fully modular design keeps builds clean and tidy
  • Japanese primary capacitor ensures long-term stability
  • Single +12V rail delivers consistent power
  • Wide 90V-264V input suits global use

Cable kit for 600 W Flex ITX PSU

This internal cable set completes a fully modular 600 W Flex ITX power supply rated for continuous operation at 40 °C. It provides the 24-pin motherboard connector, a 4-pin CPU power lead, two 6-pin PCIe connectors and two SATA power plugs for drives. The kit suits builders assembling compact desktops or 1U servers that use the Flex ATX form factor.

Replaces fixed-cable SFX or TFX units

Swapping a non-modular supply for this modular kit removes unused cables from a tight chassis, improving airflow in 1U and small-form-factor builds. The upgrade is worthwhile when the existing PSU lacks the 600 W capacity on a single +12 V rail or when cable clutter prevents proper drive placement in a dense server node.

Limited by Flex ATX length and connector count

The Flex ATX standard restricts the physical length of the power supply, which in turn caps the maximum cable reach inside larger cases. Only two SATA power connectors are supplied, so configurations with more than two SATA drives will need additional adapters. The 90-264 V input range covers global mains voltages without manual switching.

Highlights

  • Designed for 600W continuous output at 40°C
  • Fully modular design keeps builds clean and tidy
  • Japanese primary capacitor ensures long-term stability
  • Single +12V rail delivers consistent power
  • Wide 90V-264V input suits global use

Specifications

No published specifications for this item yet.

Questions about this item

Which connectors does the cable set provide for a 600W Flex ITX PSU?

The set includes a 24-pin ATX connector, a 4-pin CPU power connector, two 6-pin PCIe connectors for graphics cards, four D-type connectors and two SATA power connectors.

How are the cables attached to the PSU, and what step is often missed?

Because the PSU is fully modular, each cable plugs into its keyed port on the unit; the step often missed is pushing each connector until the latch clicks, ensuring full contact.

What component inside the PSU is most likely to need replacement after years of 24/7 operation at 40°C?

The Japanese primary capacitor on the single +12V rail is the component most likely to require replacement after extended 24/7 use at 40°C.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.