We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White ceramic electrode 58 mm with stainless steel body and 30 cm cable ending in 2.3 mm terminal

Ruth's sister

Ruth's sister Internal Power Cable 58mm ceramic electrode 30cm line M10x1 thread 2.3mm terminal

SKU CH-TJ2Q-DT348

A ceramic igniter electrode with a 30 cm cable and M10x1 thread for gas grills, ovens and heaters

  • Ceramic electrode ignites gas reliably
  • 58 mm ceramic length fits standard burners
  • M10×1 thread suits 10–14 mm mounting holes
  • 30 cm cable gives flexible routing inside appliance
  • 3 mm round terminal connects to common igniter modules

Gas grill ceramic igniter electrode

This ceramic electrode with integrated cable serves as a universal replacement igniter for gas grills, ovens, heaters, cookers, ranges and stoves. It fits appliances using LPG, propane, butane or natural gas where the mounting hole measures between 10mm and 14mm. The stainless steel body with zinc surface resists corrosion in high-heat environments.

Replaces worn or broken spark electrodes

The part upgrades any failed igniter that uses an M10x1 thread and a 2.3mm round terminal connection. The jump is worth it when the original electrode cracks, the ceramic insulator degrades or the cable terminal corrodes, causing unreliable sparking. Installers should verify the 58mm ceramic length matches the burner assembly before fitting.

Handles standard grill and stove ignition duties

The 30cm cable provides sufficient reach for most burner layouts while the M10x1 thread secures the electrode in holes over 10mm and under 14mm. Headroom runs out if the mounting hole exceeds 14mm or falls below 10mm, or if the terminal socket requires a different diameter than 2.3mm. Minor modifications may be needed for non-standard hole sizes.

Highlights

  • Ceramic electrode ignites gas reliably
  • 58 mm ceramic length fits standard burners
  • M10×1 thread suits 10–14 mm mounting holes
  • 30 cm cable gives flexible routing inside appliance
  • 3 mm round terminal connects to common igniter modules

Specifications

No published specifications for this item yet.

Questions about this item

Will the M10x1 thread fit my appliance's mounting hole?

The thread fits holes over 10 mm and under 14 mm. If the hole is outside that range you may need a small modification.

How do I connect the 2.3 mm terminal to the ignition module?

Push the 2.3 mm round terminal onto the module's spade connector until it seats firmly; a loose fit causes misfires.

How often should I replace the 58 mm ceramic electrode?

Replace it when the ceramic shows cracks or the spark becomes weak, typically after several heating seasons.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.