We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact 250W FLEX ITX-1U power supply unit with non-modular cables

Ruth's sister

Ruth's sister internal power cable 250W FLEX ITX-1U

SKU CH-79MZ-PFYG6

A 250 W Flex ATX 1U power supply with passive PFC, 72 % efficiency, two SATA connectors and a 4-pin CPU plug for compact servers or desktops

  • Fits compact ITX-1U builds with FlexATX 1.01 compliance
  • 250W continuous output powers low-power servers and NAS units
  • 72% efficiency reduces heat in small enclosures
  • Passive PFC with 115/220V switch suits global mains
  • Two SATA and two D-type connectors drive storage and peripherals

Purpose & Fit

This 250W FLEX ITX-1U power supply serves compact desktops, cash registers, NAS units and low-power industrial systems. It targets builders who need a 1U form-factor unit compliant with the Intel FlexATX 1.01 specification for space-constrained chassis.

Compatibility Check

Verify that your chassis accepts a 1U FLEX ATX outline and that the motherboard uses a 20-pin main power connector plus a 4-pin CPU power plug. The unit provides two SATA power connectors and two D-type peripheral plugs; it has no 12 V graphics-card pins, so discrete GPU builds are not supported.

Thermals, Noise & Power

A 4 cm fan cools the non-modular unit while it delivers up to 250 W continuous output at 72 % typical efficiency. Protective circuits cover over-voltage, under-voltage, short-circuit and overload events. The power-good signal settles within 100-500 ms and hold-up time is rated at 16 ms minimum. Input range covers 184-264 V AC with a manual 115/220 V selector switch.

Highlights

  • Fits compact ITX-1U builds with FlexATX 1.01 compliance
  • 250W continuous output powers low-power servers and NAS units
  • 72% efficiency reduces heat in small enclosures
  • Passive PFC with 115/220V switch suits global mains
  • Two SATA and two D-type connectors drive storage and peripherals

Specifications

No published specifications for this item yet.

Questions about this item

Does the unit ship with all cables attached or must any be bought separately?

The power supply is non-modular, so every cable is fixed to the unit and nothing extra is required for installation.

Which connector mix suits a build with two SATA drives and a 4-pin CPU socket?

This model provides two SATA connectors and a 4-pin CPU power plug, matching that exact configuration.

What does the 250 W rating deliver under continuous load in a 1U chassis?

The unit is rated for 250 W continuous output with 72 % efficiency and a minimum hold-up time of 16 ms.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.