We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
40-pin IDC ribbon cable to screw-free terminal block adapter, 2.54 mm pitch

Ruth's sister

Ruth's sister IDC40P to Terminal IDC Male 2.54mm Screw-Free Terminal Block Breakout 40pin internal power cable

SKU CH-ADKF-TXJT8

Connects a 40-pin IDC header to screw-free 2.54 mm terminal blocks for PLC or relay wiring

  • Screw-free 2.54 mm terminals speed up wiring
  • 40-pin IDC male matches standard ribbon cables
  • Breakout block converts flat cable to screwless terminals
  • IDC-to-terminal adapter simplifies PLC and relay connections

40-pin IDC breakout for PLC wiring

This cable converts a 40-pin IDC header into a screw-free terminal block with 2.54 mm pitch. It targets engineers and hobbyists who need to connect ribbon cables to PLC relay modules without soldering. The adapter simplifies prototyping and panel wiring by exposing every conductor on a reusable terminal strip. Installation requires only a standard IDC press tool.

Sustained signal integrity across all 40 contacts

The screw-free clamps maintain consistent contact pressure during continuous operation, reducing resistance drift compared to spring-only terminals. Each 2.54 mm spaced terminal accepts solid or stranded wire for reliable power and signal distribution. The IDC insulation-displacement connection remains gas-tight under thermal cycling, preventing intermittent faults in long-running automation tasks.

Highlights

  • Screw-free 2.54 mm terminals speed up wiring
  • 40-pin IDC male matches standard ribbon cables
  • Breakout block converts flat cable to screwless terminals
  • IDC-to-terminal adapter simplifies PLC and relay connections

Specifications

No published specifications for this item yet.

Questions about this item

Does the 40-pin IDC connector generate noticeable heat when powering a relay board continuously?

The adapter is a passive 40-pin IDC to 2.54 mm screw-free terminal block; it has no active components, so it does not produce measurable heat during continuous operation.

What must already be installed for the 40-pin IDC male header to connect properly?

A matching 40-pin IDC female socket with 2.54 mm pitch on the source device or cable is required for the male header to seat correctly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.