Ruth's sister
Ruth's sister HOP-14XX Lens Replacement for LITE-ON DG-16D2S Disk Drive for Xbox 360
Replacement HOP-14XX laser lens restores disc reading on Xbox 360 LITE-ON DG-16D2S drives
- Restores disc reading on LITE-ON DG-16D2S drives
- HOP-14XX lens replaces worn laser assembly
- Compatible with Xbox 360 console models
- Compact 5.5×2 cm unit fits drive bay
- Lightweight 0.05 kg part eases installation
Lens Replacement for Xbox 360 DG-16D2S
The HOP-14XX laser head replaces the optical pickup in a LITE-ON DG-16D2S drive used by the Xbox 360 console. It addresses disc read errors, slow loading and screen freezes during gameplay or DVD playback. The part is a brand new metal and plastic assembly measuring approximately 5.5 by 2 centimetres. Installation is straightforward for anyone comfortable opening the console and drive.
Passive Optical Component
As a lens assembly the part has no active electronics, so it draws no power and produces no noise or heat of its own. The drive’s existing laser diode and spindle motor determine thermal and acoustic behaviour, which are unchanged by the swap. The lightweight unit weighs roughly fifty grams and fits inside the original drive chassis without altering airflow.
Repairs DG-16D2S Read Failures
This replacement suits owners whose DG-16D2S drive suffers from the listed read faults and who want to avoid a full drive swap that would require firmware pairing. It does not help if the fault lies in the drive PCB, spindle motor or console motherboard. Buyers needing a different drive model or a complete drive unit should look elsewhere.
Highlights
- Restores disc reading on LITE-ON DG-16D2S drives
- HOP-14XX lens replaces worn laser assembly
- Compatible with Xbox 360 console models
- Compact 5.5×2 cm unit fits drive bay
- Lightweight 0.05 kg part eases installation
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the HOP-14XX lens into the LITE-ON DG-16D2S drive, and what step do people often get wrong?
Remove the drive, open the metal casing, detach the ribbon cable, swap the laser head, then reassemble; the step most people miss is reseating the ribbon cable fully before closing the case.
What maintenance or replacement will the HOP-14XX lens need later?
The lens itself has no scheduled maintenance; if read errors return after long use, the whole laser head would be replaced again rather than serviced.
What limit appears first during sustained use of the HOP-14XX lens?
Extended heavy gaming sessions can cause the laser diode to overheat, leading to temporary read failures until the drive cools down.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



