We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black electronic module with wires and connector

Ruth's sister

Ruth's sister GT Power RC Model Use Ignition Mini Tachometer Singal Trigger internal power cable

SKU CH-YRN4-XZ26N

Internal power cable connects an ignition mini tachometer signal trigger for motor RPM speed measurement

  • Measures motor RPM accurately for precise tuning
  • Ignition signal trigger captures real-time speed data
  • Designed for RC model engines and tachometers
  • New internal power cable ensures reliable connection

GT Power RC Ignition Signal Trigger

This internal power cable connects a GT Power mini tachometer to an RC model ignition system. It carries the trigger signal that lets the meter measure motor RPM and revolutions speed. The cable is designed for hobbyists who need accurate speed data from a single-cylinder engine setup. New condition ensures reliable conductivity from first use.

Upgrade from basic RPM estimation

Replaces guesswork or generic sensor leads that lack a dedicated trigger connection. The jump is worth it when precise RPM readings are required for tuning or performance logging. Builders who need multi-cylinder support or wireless telemetry will not find those functions in this single-purpose trigger cable.

Highlights

  • Measures motor RPM accurately for precise tuning
  • Ignition signal trigger captures real-time speed data
  • Designed for RC model engines and tachometers
  • New internal power cable ensures reliable connection

Specifications

No published specifications for this item yet.

Questions about this item

What connector does the GT Power ignition mini tachometer signal trigger cable use to attach to the meter?

The cable plugs directly into the tachometer's input port using the fitted miniature connector supplied on the trigger lead.

Which step do installers most often miss when fitting the trigger to measure motor RPM?

Routing the signal wire away from the ignition coil and high-tension lead prevents induced noise that causes erratic RPM readings.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.