We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
FTDI USB to RS232 configuration cable for Servotronix CDHD 007 008

Ruth's sister

Ruth's sister FTDI USB C7 RS232 Servotronix CDHD 007 008 Configuration Cable

SKU CH-YY3D-P20NA

Connects Servotronix CDHD 007 and 008 servo drives via FTDI USB to RS232 for configuration

  • FTDI chipset ensures reliable serial communication
  • RS232 interface connects directly to Servotronix CDHD drives
  • Compatible with CDHD 007 and 008 motor controllers
  • Purpose-built configuration cable for servo motor setup

FTDI USB C7 RS232 configuration cable

This cable connects a PC to Servotronix CDHD 007 and 008 servo drives for configuration and diagnostics. It uses an FTDI USB to RS232 interface so the host computer can communicate with the motor controller. The link is intended for engineers and technicians setting up motion parameters. No other servo models are supported by this specific cable assembly.

Thermals noise and power draw

The cable draws power directly from the USB port and does not require an external supply. Operation is silent because there are no moving parts or active cooling. Heat generated during normal use is negligible and dissipated through the connector housing. The assembly adds no measurable thermal load inside the cabinet.

Highlights

  • FTDI chipset ensures reliable serial communication
  • RS232 interface connects directly to Servotronix CDHD drives
  • Compatible with CDHD 007 and 008 motor controllers
  • Purpose-built configuration cable for servo motor setup

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the FTDI USB C7 RS232 cable to the Servotronix CDHD 007 008 servo drive?

Plug the USB end into the PC and the RS232 end into the drive's configuration port; the step often missed is installing the FTDI virtual COM-port driver before opening the Servotronix software.

What maintenance will the FTDI USB C7 RS232 cable need over time?

No scheduled maintenance is required; inspect the connectors and cable jacket periodically for wear or damage and replace the cable if the RS232 pins bend or the USB plug becomes loose.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.