We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey rectangular 180W PSU with 20-pin, SATA and 4-pin connectors

Ruth's sister

Ruth's sister FSP180-50PLV 180W internal power cable

SKU CH-TEJZ-9931B

Connects desktop and server motherboards with a 20-pin interface, two SATA drives and a 4-pin CPU connector at 180 W

  • Delivers reliable 180 W output for compatible Lenovo servers
  • Active PFC corrects power factor for stable operation
  • Non-modular 20-pin connector fits i2656, ir358, ir608 and more
  • Two SATA power plugs drive storage devices directly
  • Four-pin CPU connector powers processor without adapters

Internal 180W server power cable

This cable set connects a 180 watt server power supply to compatible Lenovo desktop and server hosts. It provides a single 20 pin motherboard connector, two SATA power plugs and one four pin CPU power connector. The assembly is designed for systems requiring the FSP180-50PLV or HK280-86FP form factor. Builders needing a different connector layout or higher wattage should select an alternative cable kit.

Active PFC with 9 cm cooling fan

The power supply uses active power factor correction and operates on 200 to 240 volt input. A 9 centimetre DC fan handles thermal management for the 180 watt unit. Acoustic output and power draw will vary with the host system load and chassis airflow. Installers without a 200 volt circuit or those requiring modular cabling cannot use this fixed cable design.

Spare part numbers 36001822 and 36001754

The package includes the complete cable harness matching spare part numbers 36001822 and 36001754. No additional software, adapters or mounting hardware are supplied. The cables enable direct replacement in listed Lenovo i series and r series models such as i2656, ir358 and r608. Systems using a different mainboard pinout or SATA device count will need a different harness.

Highlights

  • Delivers reliable 180 W output for compatible Lenovo servers
  • Active PFC corrects power factor for stable operation
  • Non-modular 20-pin connector fits i2656, ir358, ir608 and more
  • Two SATA power plugs drive storage devices directly
  • Four-pin CPU connector powers processor without adapters

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 20-pin main cable to the motherboard in a Lenovo i2656 server?

Align the 20-pin connector with the motherboard socket, press straight down until the latch clicks, then attach the 4-pin CPU plug and the two SATA power leads to their matching ports.

Which parts of this 180 W non-modular unit are most likely to need replacement after extended use?

The 9 cm DC cooling fan and the internal electrolytic capacitors are the first components that typically wear out under continuous 200-240 V operation.

At what load level does the active PFC circuit hit its thermal limit during sustained 180 W output?

Continuous full-load operation at 180 W with 200-240 V input will reach the thermal ceiling of the active PFC stage first.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.