We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black relay housing with terminal posts and mounting tabs

Ruth's sister

Ruth's sister EVR200CE-1 200A 12V internal power cable

SKU CH-JFWX-86MA5

High-voltage DC relay rated 200 A at 12 V for lithium electric-vehicle contactor applications

  • Handles 200 A continuous current for high-power EV circuits
  • 12 V DC coil voltage matches standard vehicle architectures
  • HVDC relay design switches high-voltage DC loads safely
  • Lithium EV contactor rating suits modern battery systems

High-Current HVDC Relay

The Ruth's sister EVR200CE-1 is a high-voltage DC contactor rated for 200 amps at 12 volts. It is designed for lithium electric-vehicle power circuits and similar high-current DC switching applications where reliable isolation is required.

Thermals Noise Power

The sealed contactor operates silently with no moving-air cooling needed. Power draw is limited to the coil activation current during switching events. Heat generation remains low in normal use because the main contacts carry current with minimal resistance.

Highlights

  • Handles 200 A continuous current for high-power EV circuits
  • 12 V DC coil voltage matches standard vehicle architectures
  • HVDC relay design switches high-voltage DC loads safely
  • Lithium EV contactor rating suits modern battery systems

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the EVR200CE-1 contactor and which step is commonly missed?

Mount the unit securely, connect the high-current terminals to the 200A circuit, then wire the 12VDC coil; the step often missed is adding a coil suppression diode to protect the control electronics.

What maintenance or replacement will the EVR200CE-1 need over time?

Inspect the main contacts for erosion after high-cycle operation and verify the 12V coil resistance periodically; replace the contactor if contact resistance rises or the coil falls out of specification.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.