We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver power supply unit with 80mm fan grille and multiple cable connectors

Ruth's sister

Ruth's sister DPS-225GB A internal power cable

SKU CH-FBSM-N9WZX

A 225 W server power supply with passive PFC, 100–240 V input, 20-pin and 4-pin ATX connectors, plus two SATA and two Molex outputs

  • 225 W max output powers desktop and server builds
  • Passive PFC keeps design simple and reliable
  • 125 mm x 110 mm x 80 mm fits standard chassis
  • 100 V to 240 V input works worldwide
  • 20 pin plus 4 pin ATX plus 2 SATA plus 2 Molex connectors cover essential components

223 W Internal Power Cable

The Ruth's sister DPS-225GB A delivers 223 watts through a non-modular design with a 20-pin ATX connector, a 4-pin ATX connector, two SATA plugs and two Molex plugs. An 80 mm fan provides cooling inside the 125 mm by 110 mm by 80 mm enclosure. It accepts 100 V to 240 V input at 50 Hz or 60 Hz.

Desktop and Server Builds

This unit suits desktop or server builds that require a 20-pin ATX connection and passive power-factor correction. It is not for systems needing modular cabling, active PFC, an 80 PLUS badge, or higher 12 V current than 15 A. Builds requiring more than two SATA or two Molex connections should look elsewhere.

15 A on the 12 V Rail

The single specification that decides fit is the 12 V rail rated at 15 A, which sets the practical limit for CPU and graphics power. If the target hardware draws more on 12 V, this cable will not support it.

Highlights

  • 225 W max output powers desktop and server builds
  • Passive PFC keeps design simple and reliable
  • 125 mm x 110 mm x 80 mm fits standard chassis
  • 100 V to 240 V input works worldwide
  • 20 pin plus 4 pin ATX plus 2 SATA plus 2 Molex connectors cover essential components

Specifications

No published specifications for this item yet.

Questions about this item

How do I confirm the 225W DPS-225GB A is running correctly once installed?

The system powers on and stays stable under load; the 80mm fan spins and the 100–240V AC input accepts your local mains voltage.

What cables and connectors come with the unit and what must I source separately?

Fixed cables include one 20-pin ATX, one 4-pin ATX, two SATA and two Molex connectors; no modular cables are included so nothing extra is needed unless your build requires additional SATA or Molex leads.

The title mentions both 223W and 225W — which rating should I use when choosing?

The label states 225W maximum output; treat 223W as a rounded variant and size your build to the 225W figure.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.