We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular silver power supply unit with multiple cable connectors visible

Ruth's sister

Ruth's sister DPS-200PB-196 A internal power cable

SKU CH-XTGP-2TDSW

200 W internal power supply with 6-pin graphics and 4-pin CPU connectors for compatible SFF desktops

  • 200 W output powers compatible small-form-factor desktops
  • Active power factor correction improves mains efficiency
  • 100–264 V input works on global voltages
  • Six-pin GPU and four-pin CPU connectors included
  • Fits HP 400 G1/G2, 600 G1/G2, 690 G1 and 800 G1 SFF models

200W server power supply for compact desktops

This 200W server power supply fits small-form-factor desktops that use the DPS-200PB-196 A form factor. It delivers 200W from a 100-264V input with active PFC and a non-modular cable set. The unit is new and intended as a direct replacement for compatible OEM systems.

Active PFC and fixed cable layout

Active PFC helps maintain efficient power draw across the 100-264V input range. The non-modular design provides a motherboard 6-pin connector, a motherboard control cable and a CPU 4-pin connector in a fixed harness. No modular cables are included, so cable routing follows the supplied layout.

Replaces specific OEM PSU models

This unit replaces power supplies such as PS-4241-2HF1, PCC002, PCC004, D12-240P1A, D12-240P2A, D12-240P3B, PCE011 and D14-200P2B. It suits 400 G1 SFF, 400 G2 SFF, 600 G1 SFF, 600 G2 SFF, 690 G1 SFF and 800 G1 SFF chassis. Builders needing higher wattage or modular cabling should look elsewhere.

Highlights

  • 200 W output powers compatible small-form-factor desktops
  • Active power factor correction improves mains efficiency
  • 100–264 V input works on global voltages
  • Six-pin GPU and four-pin CPU connectors included
  • Fits HP 400 G1/G2, 600 G1/G2, 690 G1 and 800 G1 SFF models

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the 6-pin motherboard power (P1) and 4-pin CPU power (P3) on the DPS-200PB-196 A?

Plug the single 6-pin P1 connector into the motherboard main power header and the single 4-pin P3 connector into the CPU power header; the control cable P2 attaches to the matching motherboard control pins.

What part of the DPS-200PB-196 A is most likely to need replacement after extended use?

The internal cooling fan is the primary wear item; bearings can degrade over time and the unit is non-modular so cables cannot be swapped separately.

At what load does the 200 W DPS-200PB-196 A hit its thermal limit during sustained operation?

Continuous loads near the 200 W rating will trigger thermal protection first, especially in the compact 15.5×7.3×9.5 cm chassis with limited airflow.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.