We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with terminal blocks and heatsink

Ruth's sister

Ruth's sister DM556 5.6A internal power cable for 42 57 86 stepper motor

SKU CH-F1G1-Q8YC3

Digital stepper motor driver delivering 5.6 A for 42, 57 and 86 size motors

  • Drives 42, 57 and 86 stepper motors
  • Delivers 5.6 A continuous current per phase
  • Replaces M542, 2M54 and TB6600 drivers
  • Two-phase digital control for precise motion

DSP DM556 driver for 42 57 86 motors

The DSP DM556 is a digital stepper motor driver rated for 5.6 A two-phase operation. It is designed to control NEMA 42 57 and 86 frame stepper motors in CNC and automation builds. The unit replaces earlier M542 2M54 and TB6600 models in compatible systems. Builders integrating this driver gain a modern DSP-based alternative for existing motor stock.

Check motor current and wiring before ordering

Verify that each motor phase current does not exceed 5.6 A and that the motor wiring matches a two-phase configuration. Confirm the supply voltage range suits your power supply and that the control signals from your motion controller are compatible with the driver input specification. Ensure mounting space and heat dissipation meet the driver physical requirements.

Highlights

  • Drives 42, 57 and 86 stepper motors
  • Delivers 5.6 A continuous current per phase
  • Replaces M542, 2M54 and TB6600 drivers
  • Two-phase digital control for precise motion

Specifications

No published specifications for this item yet.

Questions about this item

Does the DM556 driver come with a power supply or cables for the 42 57 86 stepper motor?

The listing is for the DM556 driver only; a suitable DC power supply and motor cables must be sourced separately.

Should I choose the DM556 over an M542 or TB6600 for a 5.6A 2-phase motor?

The DM556 is rated at 5.6A for 2-phase motors and is presented as a direct replacement for M542, 2M54 and TB6600 models.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.