We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small metal box with coaxial, optical, RCA and 3.5 mm ports

Ruth's sister

Ruth's sister Digital to Analog Audio Converter international power cord

SKU CH-7VAC-EB778

Converts coaxial or Toslink digital audio to analog RCA and 3.5 mm outputs simultaneously with 24-bit SPDIF at 32, 44.1, 48 and 96 kHz sampling

  • Converts coaxial or Toslink digital audio to analog RCA and 3.5 mm simultaneously
  • Connects directly to amplifiers via standard RCA jacks or headphones through 3.5 mm cable
  • Supports uncompressed 2-channel LPCM output at 32, 44.1, 48 and 96 KHz
  • 24-bit SPDIF bitstream on left and right channels ensures clean signal transmission
  • Metal housing provides electromagnetic-noise-free transmission in a compact 5.1 x 4.1 x 2.6 cm form

What this converter does

This digital-to-analog audio converter accepts coaxial or Toslink optical input and delivers stereo analogue sound through both RCA phono sockets and a 3.5 mm headphone jack at the same time. It handles uncompressed two-channel LPCM streams at 32 kHz, 44.1 kHz, 48 kHz and 96 kHz with 24-bit resolution. The metal enclosure measures approximately 5.1 cm by 4.1 cm by 2.6 cm and provides a transmission path free of electromagnetic noise.

Build and connections day to day

The all-metal chassis gives a solid feel and helps shield the signal from interference in a typical living-room or desktop setup. Both digital inputs are located on one side while the analogue outputs sit on the opposite edge, so cables run cleanly toward an amplifier or a pair of powered speakers. A 3.5 mm jack on the front panel lets you plug headphones in without reaching behind the rack. The unit ships with an international power cord for the included low-voltage supply.

Check before you buy

Your source device must be set to output stereo PCM or LPCM; the converter will not decode Dolby 5.1 or any multi-channel bit-stream. It supports only 2.1-channel analogue output, so surround receivers expecting discrete 5.1 feeds will not work. Verify that your TV, console or streamer can be configured to PCM before ordering. No additional drivers or software are required.

Highlights

  • Converts coaxial or Toslink digital audio to analog RCA and 3.5 mm simultaneously
  • Connects directly to amplifiers via standard RCA jacks or headphones through 3.5 mm cable
  • Supports uncompressed 2-channel LPCM output at 32, 44.1, 48 and 96 KHz
  • 24-bit SPDIF bitstream on left and right channels ensures clean signal transmission
  • Metal housing provides electromagnetic-noise-free transmission in a compact 5.1 x 4.1 x 2.6 cm form

Specifications

No published specifications for this item yet.

Questions about this item

What sampling frequencies does the digital-to-analog converter accept?

The converter handles 32, 44.1, 48 and 96 kHz stereo PCM signals.

How much space does the metal enclosure need on a shelf or rack?

The unit measures 5.1 cm by 4.1 cm by 2.6 cm, so it fits in a small desktop footprint.

Which audio setting on the source device makes the converter work correctly?

Set the source output to PCM or LPCM stereo; the converter will not decode Dolby 5.1 or other multi-channel formats.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.