We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat internal power cable with nine pin connectors

Ruth's sister

Ruth's sister CXA-0426 lcd inverter internal power cable

SKU CH-CF6R-98FR1

Connects an LCD inverter with a 9-pin interface inside a display panel

  • Designed for LCD inverter applications with CXA-0426 compatibility
  • New condition ensures reliable internal power delivery from stock
  • PCU-P067C model number identifies exact replacement part
  • TFT product type matches display panel requirements precisely
  • First listed by manufacturer in April 2023 for current availability

Internal LCD inverter cable

The Ruth's sister CXA-0426 is an internal power cable designed to connect a TFT LCD inverter inside a device. It serves repair technicians and hobbyists who need to replace a damaged or missing inverter harness in compatible hardware. This new cable carries the model identifier PCU-P067C and was first listed by the manufacturer in 2023.

Connector layout and daily handling

The cable assembly uses a 9-pin interface on one end and a 67-pin interface on the other to bridge the inverter board and the main system. Its internal routing design means it sits inside the chassis, so strain relief depends on the surrounding framework rather than external latches. Builders should verify pin-out alignment before installation to avoid mis-mating the high-density connector.

Inverter interface constraints

This harness is limited to devices that accept the specific 9-to-67 pin configuration defined by the CXA-0426 specification. It cannot be used with panels that require a different pin count, voltage sequence or signalling protocol. Buyers who need a universal inverter cable or a different pin arrangement will find this part incompatible with their hardware.

Highlights

  • Designed for LCD inverter applications with CXA-0426 compatibility
  • New condition ensures reliable internal power delivery from stock
  • PCU-P067C model number identifies exact replacement part
  • TFT product type matches display panel requirements precisely
  • First listed by manufacturer in April 2023 for current availability

Specifications

No published specifications for this item yet.

Questions about this item

What connector standard does the CXA-0426 lcd inverter cable use for the display panel?

The cable uses a 9-pin connector to link the inverter board to the LCD panel backlight.

What physical clearance is required to fit the PCU-P067C cable inside the chassis?

The flat ribbon design needs a narrow routing path between the inverter board and the panel connector.

How is the CXA-0426 cable installed and which orientation step is often missed?

Align the keyed 9-pin plug with the inverter header and press firmly until the latch clicks.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.