We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A thin flat ribbon cable with a small rectangular connector at one end

Ruth's sister

Ruth's sister CXA-0385-M inverter internal power cable

SKU CH-JD69-EMFDP

Connects a CXA-0385-M inverter to a TFT panel for internal power delivery

  • CXA-0385-M inverter powers TFT displays reliably
  • New condition ensures clean installation from day one
  • Manufacturer listed April 2023 for current compatibility
  • Internal power cable design fits standard chassis routing
  • Model CXA-0385-M matches specific inverter requirements

CXA-0385-M inverter cable

The Ruth's sister CXA-0385-M is an internal power cable designed for TFT inverter connections inside compatible hardware. It serves builders or technicians replacing or routing power to a display backlight inverter board. The part is listed as new condition and was first listed by the manufacturer in 2023.

Replaces worn or damaged inverter leads

This cable replaces an original CXA-0385-M inverter lead that has become brittle, frayed or lost during a panel swap. The jump is worth it when the existing harness shows cracked insulation or intermittent flicker caused by broken conductors. It is not for users needing a different pin count, voltage rating or connector pitch than the original design.

Simple plug-in installation

Installation consists of disconnecting the old harness and seating the CXA-0385-M connectors into the inverter and power source headers. What usually goes wrong is forcing a misaligned plug, which bends pins or cracks the header housing. Verify orientation before applying pressure and route the cable clear of moving parts or sharp chassis edges.

Highlights

  • CXA-0385-M inverter powers TFT displays reliably
  • New condition ensures clean installation from day one
  • Manufacturer listed April 2023 for current compatibility
  • Internal power cable design fits standard chassis routing
  • Model CXA-0385-M matches specific inverter requirements

Specifications

No published specifications for this item yet.

Questions about this item

What connector does the CXA-0385-M inverter cable plug into?

The cable connects directly to the CXA-0385-M inverter module inside the display assembly.

Which step is most often missed when fitting the CXA-0385-M inverter cable?

Routing the cable clear of the hinge bracket before securing the inverter prevents pinching when the panel closes.

When should the CXA-0385-M inverter cable be replaced?

Replace it if the backlight flickers, shows pink tint at startup, or the connector pins are bent or corroded.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.