We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 32cm Y-splitter cable with C14 male plug to C7 and 1-15R female sockets

Ruth's sister

Ruth's sister C14 to C7 + 1-15R Y Splitter 32cm internal power cable

SKU CH-FGHE-2F7JZ

Splits one C14 inlet into C7 and 1-15R outlets, 32 cm long, rated 10 A at 250 V

  • Splits one C14 inlet into C7 and 1-15R outlets
  • 32 cm length keeps internal cabling tidy
  • Rated 10 A at 250 V on C14 and 1-15R ends
  • C7 leg rated 2.5 A for low-power devices
  • H05VV-F 3×1.5 mm² cable handles 125–250 V supplies

Splitter cable for dual devices

This Y-splitter cable converts a single IEC 320 C14 male plug into one C7 and one US 1-15R female socket. It lets you power two devices such as PCs monitors scanners or printers from one outlet. The cable is rated for 10 A at 250 V and measures 32 cm in length.

Passive power distribution

The cable uses H05VV-F 3x1.5mm2 conductors and adds no active components so it generates no heat or noise of its own. It simply passes through the supply voltage which the note says is generally used for 125 to 250 V. The C7 branch is rated at 2.5 A while the C14 and 1-15R branches each handle 10 A.

Ready to use out of the box

The package includes one splitter cable with no extra software or drivers required. It works immediately with standard power cords and dual-supply servers or remote PDUs. The only limitation noted is that the cable does not transform voltage so both connected devices must accept the same line voltage.

Highlights

  • Splits one C14 inlet into C7 and 1-15R outlets
  • 32 cm length keeps internal cabling tidy
  • Rated 10 A at 250 V on C14 and 1-15R ends
  • C7 leg rated 2.5 A for low-power devices
  • H05VV-F 3×1.5 mm² cable handles 125–250 V supplies

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the C14 to C7 plus 1-15R Y splitter inside my case, and what step do people often miss?

Plug the C14 male end into your PSU or PDU outlet, then connect the C7 and 1-15R female ends to your devices; the step often missed is verifying that the combined load stays within the 10 A C14 rating.

What maintenance or replacement will this 32 cm H05VV-F 3×1.5 mm² splitter need over time?

No scheduled maintenance is required; inspect the cable jacket and connectors periodically for heat damage or loose pins, and replace the whole assembly if insulation cracks or contacts become intermittent.

What limit appears first when the Y splitter runs continuously at high load?

The C7 female head is rated at 2.5 A, so it reaches its current ceiling well before the 10 A C14 inlet or 1-15R socket, making it the first bottleneck under sustained use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.