We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black connector with two wires for 60 mm fan

Ruth's sister

Ruth's sister ADDA AD0612MB-D70GL 6015 DC 12V 0.11A internal power cable

SKU CH-E8D1-HGEJ0

Internal power cable for 60 × 60 × 15 mm DVR fans running at 12 V and 0.11 A

  • Designed for ADDA AD0612MB-D70GL 6015 fan compatibility
  • 12 V DC input matches fan power specification
  • 11 A current rating supports rated fan draw
  • 60 × 60 × 15 mm form factor fits unit dimensions

Purpose-built cable for ADDA 6015 fan

This internal power cable is made for the ADDA AD0612MB-D70GL 6015 DC 12V 0.11A fan used in DVR and power-supply cooling. It matches the 60 by 60 by 15 millimetre frame and the 12 volt 0.11 ampere rating without adapters. Installers who need a direct replacement for a worn or missing lead will find the correct connector and wire gauge already fitted. It is not for builders who need a different voltage, current or connector pin-out.

Thermal noise and power behaviour

The cable carries the fan's rated 12 volt 0.11 ampere load so the 6015 unit runs at its specified speed and airflow. No extra resistance is added, so the fan's thermal performance and acoustic profile stay as the manufacturer designed. Power draw at the source remains the stated 0.11 ampere at 12 volt with no measurable loss across the short internal run.

Highlights

  • Designed for ADDA AD0612MB-D70GL 6015 fan compatibility
  • 12 V DC input matches fan power specification
  • 11 A current rating supports rated fan draw
  • 60 × 60 × 15 mm form factor fits unit dimensions

Specifications

No published specifications for this item yet.

Questions about this item

How do I connect the cable to the ADDA AD0612MB-D70GL fan, and which polarity mistake should I avoid?

Align the connector with the fan's 12 V DC input pins, matching positive to positive and negative to negative; reversing the wires will prevent the 6015 fan from spinning.

What upkeep does the cable require, and when should I replace it?

No routine maintenance is needed; inspect the insulation and connector crimps whenever the DVR chassis is open, and swap the cable if you see cracked sheathing, corroded pins or intermittent fan operation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Internal Power Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.