We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ruth's sister

Ruth's sister 71001996 3.5mm wired lapel clip microphone

SKU CH-AN9H-NWKME

An omnidirectional condenser lapel microphone with a 3.5 mm plug, 1.5 m cable and clip-on design for hands-free recording on smartphones, computers and loudspeakers

  • Hands-free recording with 3.5 mm plug-and-play connection
  • Omnidirectional pickup captures sound from every direction
  • Clip-on design secures to shirt, collar or pocket
  • 5 m cable gives freedom to move while recording
  • Condenser capsule delivers -34 dB sensitivity across 20 Hz to 16 kHz

Compact lapel microphone for portable recording

This wired lapel clip microphone uses a condenser transducer with an omnidirectional polar pattern to capture sound from all directions. The 3.5 mm plug provides a direct analogue connection to smartphones, computers and other devices with a compatible jack. It is intended for users who need a lightweight, clip-on solution for interviews, conferences, karaoke or general voice recording without wireless pairing.

Consistent sensitivity during extended sessions

The condenser element operates on a 3 V to 5 V supply delivered through the 3.5 mm connection, maintaining a sensitivity of -34 dB ± 1 across the 20 Hz to 16 kHz frequency range. Because the design is passive and draws minimal power from the host device, output level remains stable during long recordings without the voltage sag that can affect battery-powered wireless units. The 1.5 m cable allows comfortable movement while keeping the signal path short and free from digital compression artefacts.

Analogue 3.5 mm interface limits

The three-pole 3.5 mm connector carries a mono microphone signal plus a ground reference, so it cannot transport stereo audio or digital control data. Compatibility depends entirely on the host device wiring its jack to the CTIA or OMTP standard expected by the microphone; devices that use a different pinout or lack plug-in power will produce no signal or excessive noise. The 2.2 mm cable diameter and fixed 1.5 m length set a practical distance limit, and the analogue link offers no error correction or latency compensation.

Highlights

  • Hands-free recording with 3.5 mm plug-and-play connection
  • Omnidirectional pickup captures sound from every direction
  • Clip-on design secures to shirt, collar or pocket
  • 5 m cable gives freedom to move while recording
  • Condenser capsule delivers -34 dB sensitivity across 20 Hz to 16 kHz

Specifications

No published specifications for this item yet.

Questions about this item

Does the 3.5 mm condenser capsule draw enough current to warm up or make noise during a full-day recording session?

The condenser element runs on 3 V to 5 V plug-in power from the 3.5 mm jack, so it produces no audible self-noise and no perceptible heat even after hours of continuous use.

What device must already provide a 3.5 mm TRS microphone input with plug-in power for this lapel mic to function?

You need a smartphone, laptop, camera or audio recorder that supplies 3 V to 5 V bias voltage on its 3.5 mm mic socket; a plain line-in or headphone-only jack will not power the capsule.

Will the 1.5 m cable and 3.5 mm plug work reliably with an older DSLR or camcorder that has a recessed microphone socket?

The 3.5 mm plug is a standard straight connector and the cable is 1.5 m long, so it reaches most recessed sockets on legacy cameras without an extension, though very deep recesses may still need a short adapter.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.