We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten 6-pin PCIe power connectors on 18 AWG yellow and black cables, 50 cm long

Ruth's sister

Ruth's sister 6Pin PCI-E power cable 10 connectors 18AWG 50cm internal power cable

SKU CH-M56C-R10XX MPN 1007

Supplies up to ten graphics cards or mining rigs with 18 AWG tinned-copper 6-pin power cables, each 50 cm long

  • 10 connectors for multi-GPU mining rigs
  • 18AWG tinned-copper wire handles high current
  • 50 cm length fits tight chassis layouts
  • O-type and 6-pin ends match PSU and GPU ports
  • Rated for 1200-2000 W power supplies

Internal 6Pin PCI-E Power Cable

This cable set provides ten 6Pin male connectors on a single 50 cm harness built from 18AWG tinned copper wire. It is designed to replace damaged leads on power supplies rated from 1200 W to 2000 W. The yellow conductors carry positive voltage and the black conductors carry negative voltage. Each end terminates in a 14-5 O-type connector for the PSU side.

Mining rigs and high-wattage workstations

The ten-connector layout suits Bitcoin and Ethereum mining rigs such as WhatsMiner and Antminer units that draw multiple PCI-E feeds from one PSU. It also fits Bitmain APW and Whatsminer P3 series power supplies when the original cables are worn. Builds that need only one or two PCI-E plugs will have unused connectors adding clutter inside the case.

Ten 6Pin connectors on one harness

The deciding specification is the ten 6Pin male plugs supplied on a single 50 cm cable. Verify that your power supply uses the matching 14-5 O-type interface and that your graphics cards or mining boards accept standard 6Pin PCI-E power. If your hardware requires 8Pin or 12VHPWR connectors, this cable will not fit.

Highlights

  • 10 connectors for multi-GPU mining rigs
  • 18AWG tinned-copper wire handles high current
  • 50 cm length fits tight chassis layouts
  • O-type and 6-pin ends match PSU and GPU ports
  • Rated for 1200-2000 W power supplies

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the 6Pin PCI-E cable is delivering power correctly after installation?

The yellow wire is positive and the black wire is negative; verify each of the ten 6Pin male connectors seats fully into the GPU or miner board and check that the system powers on without errors.

What comes in the package and what must I source separately?

The box contains the 50 cm cable with ten 6Pin male ends and 14-5 O-type terminals; you must provide a compatible PSU (1200-2000 W) with matching 6Pin outputs.

Which capacity suits a 1200 W PSU powering several mining rigs?

The cable is rated for PSUs from 1200 W to 2000 W and supplies ten 6Pin connectors, so one cable can serve multiple devices on a 1200 W unit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.